Scott City School District in Missouri recently broke ground on an 8,990-sf performing arts theater that will also function as a tornado safe room. The $2.1 million project will be 75% funded by the Federal Emergency Management Agency. The district will pick up the remainder of the tab.
The structure, to be constructed of pre-cast concrete panels, is designed to withstand and EF-5 tornado with winds of up to 250 mph.
The district applied for the FEMA grant four years ago. The project was held up while the district requested additional funding from FEMA after the construction cost estimate rose.
“It's been quite a process in paperwork, but here we are breaking ground,” a school official said. “It's exciting for the community.” Zoellner Construction Co. of Perryville, Mo., is the contractor, and Dille Traxel Architecture of Poplar Bluff, Mo., is the architect.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
