flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

FEMA document provides simplified seismic design provisions for low-hazard regions

Codes and Standards

FEMA document provides simplified seismic design provisions for low-hazard regions

Forty four states have areas defined as low-hazard.


By Peter Fabris, Contributing Editor | February 21, 2018

The Federal Emergency Management Agency (FEMA) released a document to assist structural designers in meeting building code requirements for low seismic-hazard regions.

The FEMA NEHRP document provides design guidance for ordinary SDC B buildings as denoted in ASCE/SEI 7. FEMA says its document will help designers to meet the code “without wading through the full, complex seismic design process in ASCE/SEI 7.”

Even in areas where seismic activity is low—Seismic Design Category (SDC) B—structural engineers must still complete a full seismic design process to meet building code requirements. Even in these regions, the risk of building damage or collapse is real.

A case in point is the 2011 Mineral, Va., earthquake that shook much of the East Coast and caused significant damage in areas close to the tremor’s origin.

Related Stories

Codes and Standards | Mar 4, 2021

Biden administration overturns Trump’s federal building design mandate

Previous order promoted classical and “traditional” architecture above others.

Codes and Standards | Mar 3, 2021

Texas freeze raises questions about risks of electrifying buildings

Gas stoves helped residents cook, boil water when power went out.

Codes and Standards | Mar 2, 2021

New Seattle building code eliminates fossil fuels for most space and water heating

Also increases on-site solar photovoltaics, reduces envelope heat loss, air leakage, and interior lighting power allowances.

Codes and Standards | Feb 25, 2021

It’s not just lumber—roofing material prices are also on the rise

Lower demand for petroleum products means less asphalt production.

Codes and Standards | Feb 23, 2021

ASHRAE Epidemic Task Force releases updated Building Readiness Guide

Includes flush calculations to reduce time and energy to clear contaminants between occupancy periods.

Codes and Standards | Feb 22, 2021

Preservation of Affordable Housing develops climate resilience strategy

Includes backup power for resident and staff “area of refuge”.

Codes and Standards | Feb 18, 2021

Construction industry moves toward comprehensive U.S. BIM standard

NIBS hosts roundtable to create coordinated program to advance collaboration.

Codes and Standards | Feb 17, 2021

Construction on international sports venues is ripe for corruption

Poor planning, complex contracting, a lack of accountability and high levels of collusion to blame.

Codes and Standards | Feb 16, 2021

Feds may fund removal of some urban highways

Senate bill proposes pilot program to reknit communities.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â