flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Fannie Mae study says affordable rental units more energy efficient than market-rate units

Fannie Mae study says affordable rental units more energy efficient than market-rate units

EPA makes its Energy Star score available for the multifamily sector


By BD+C Staff | October 2, 2014

Fannie Mae’s new report on energy usage in the multifamily sector found that affordable properties use 28% less energy per unit and are 29% smaller than market-rate properties. Market-rate units incur higher energy cost and use per square foot because there are more units per 1,000 square feet among affordable properties—1.29 affordable units, versus 0.91 market rate units per 1,000 sf.

The report, “Transforming Multifamily Housing: Fannie Mae’s Green Initiative and Energy Star for Multifamily,” provides comprehensive multifamily energy and water data. The first of its kind report serves as the basis for the EPA’s Energy Star Score for multifamily structures.

Costs differentials on energy use can be very steep for multifamily properties. The least efficient property could spend as much as $165,000 more in annual energy costs than a similar property operating at peak efficiently. When owners paid for all energy costs, median annual energy use was 26% higher than when tenants were responsible for paying energy costs.

In a related development, the EPA made its Energy Star score available for the multifamily sector on September 16. According to Fannie Mae, the score will enable owners and operators of multifamily properties with 20 or more units to quantify the energy performance of their properties.

(http://www.multihousingnews.com/news/fannie-mae-releases-major-study-on-multifamily-energy-use)

Related Stories

Codes and Standards | Jul 6, 2015

First valuation advisory for green and high performance property adopted

The document provides voluntary guidance to appraisers on the background and competency necessary to credibly value green buildings.

Codes and Standards | Jun 24, 2015

Maryland’s Prince George County turns to P3s to build green infrastructure

Over the next 10 years, the county must convert 15,000 acres of watertight surfaces—almost 5% of the county's total area—into surfaces that absorb or treat rainwater. 

Codes and Standards | Jun 24, 2015

Philadelphia considers more incentives for green building

Developers could be allowed additional height, floor area on projects that meet benchmarks.

Codes and Standards | Jun 24, 2015

LEED building at Duke University may be retrofitted to prevent bird deaths

More birds die from colliding with buildings at Duke than on any other campus in a 45-school survey conducted by Augustana College. Duke is located along the Atlantic Flyway, a bird migration route. 

Codes and Standards | Jun 24, 2015

Balcony collapse in Berkeley, Calif., prompts an examination of codes

Dry rot and too much weight appear to be the causes of a fatal accident at an eight-year-old building in Berkeley, Calif. 

Codes and Standards | Jun 18, 2015

Guides to wood construction in high wind areas updated

The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.

Codes and Standards | Jun 18, 2015

New document addresses school safety and security

In an effort to balance security and fire safety features within codes, standards and planning, NFPA hosted a two-day workshop, “School Safety, Codes and Security”, last December. The findings are now available in an NFPA report.

Codes and Standards | Jun 18, 2015

Two myths regarding NFPA 101 Life Safety Code debunked

NFPA life safety engineer Ron Coté settles the debate over second egress doors and exit signs.

Codes and Standards | Jun 18, 2015

How to prevent corrosion in sprinkler system piping

The technical committees responsible for NFPA 13, Installation of Sprinkler Systems, have been looking at ways to eliminate or reduce corrosion in sprinkler systems for several revision cycles.

Codes and Standards | Jun 11, 2015

Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

Includes results of new tests and addresses IECC and ASHRAE compliance paths.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021