Facility managers are increasingly looking to adopt the Internet of Things (IoT) in their building maintenance strategies, with 60% of professionals predicting that IoT will impact their building and maintenance policies within the next year, according to a survey by Schneider Electric.
Roughly two out of three respondents plan to increase investment in building capital expenses in 2016, including advanced building technologies. A few factors are hampering facility managers from taking full advantage of building data, the survey indicated. Seventy percent of facility managers said that their building management staff is very or extremely skilled in data analysis, but only 27% utilize data-driven analytics solutions for building management.
Key barriers to uptake include the amount of funding required (39% say that is a top concern), and a lack of internal resources available to interpret data into actionable results (31% report that as a top concern). Only 26% of respondents feel that available building information is totally adequate for facility maintenance planning. A majority of respondents cited room for improvement in this area, and only 15% said that they fully utilize predictive maintenance tools to proactively assess and target equipment maintenance.
“Facility professionals need to be able to better visualize what’s happening across their footprint and make educated decisions to correct and improve conditions,” said Brett Wheless, director of field services, Schneider Electric. “More than half of facility managers are still largely reactive when it comes to maintaining building systems, which can have major impacts on occupant comfort and can decrease the life of the building. We are now seeing a change in attitude among facility professionals that is driving them to think differently about the way they collect and assimilate building data.”
Related Stories
| May 17, 2012
New standard for Structural Insulated Panels under development
ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.
| May 17, 2012
Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’
A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.
| May 17, 2012
California Governor orders new green standards on state buildings
California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.
| May 17, 2012
New Zealand stadium roof collapse blamed on snow, construction defects
Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.
| May 17, 2012
OSHA launches fall prevention campaign
The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.
| May 15, 2012
Suffolk selected for Rosenwald Elementary modernization project
The 314-student station elementary school will undergo extensive modernization.
| May 10, 2012
Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond
Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.
| May 10, 2012
Resilience should be considered a sustainability factor
Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.
