flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Facility managers say Internet of Things, analytics will impact maintenance soon

Codes and Standards

Facility managers say Internet of Things, analytics will impact maintenance soon

More reliable data needed for optimal results from the technology.


By Peter Fabris, Contributing Editor | May 23, 2016
Facility managers say Internet of Things, analytics will impact maintenance soon

Photo: Thomas Hawk/Creative Commons.

Facility managers are increasingly looking to adopt the Internet of Things (IoT) in their building maintenance strategies, with 60% of professionals predicting that IoT will impact their building and maintenance policies within the next year, according to a survey by Schneider Electric.

Roughly two out of three respondents plan to increase investment in building capital expenses in 2016, including advanced building technologies. A few factors are hampering facility managers from taking full advantage of building data, the survey indicated. Seventy percent of facility managers said that their building management staff is very or extremely skilled in data analysis, but only 27% utilize data-driven analytics solutions for building management. 

Key barriers to uptake include the amount of funding required (39% say that is a top concern), and a lack of internal resources available to interpret data into actionable results (31% report that as a top concern). Only 26% of respondents feel that available building information is totally adequate for facility maintenance planning. A majority of respondents cited room for improvement in this area, and only 15% said that they fully utilize predictive maintenance tools to proactively assess and target equipment maintenance.

“Facility professionals need to be able to better visualize what’s happening across their footprint and make educated decisions to correct and improve conditions,” said Brett Wheless, director of field services, Schneider Electric. “More than half of facility managers are still largely reactive when it comes to maintaining building systems, which can have major impacts on occupant comfort and can decrease the life of the building. We are now seeing a change in attitude among facility professionals that is driving them to think differently about the way they collect and assimilate building data.”

Related Stories

| Nov 26, 2012

How to boost resilient systems that are sustainable

Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.

| Nov 26, 2012

Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction

The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.

| Nov 26, 2012

Questions linger over ability of Miami's newer high-rises to withstand hurricanes

Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.

| Nov 26, 2012

Changes in development and building standards needed for health of Potomac River

The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.

| Nov 16, 2012

South Dakota prefers LEED over building code on state projects

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.

| Nov 16, 2012

AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers

The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.

| Nov 16, 2012

New ANSI/BIFMA standards developed for educational seating

The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021