Facility managers are increasingly looking to adopt the Internet of Things (IoT) in their building maintenance strategies, with 60% of professionals predicting that IoT will impact their building and maintenance policies within the next year, according to a survey by Schneider Electric.
Roughly two out of three respondents plan to increase investment in building capital expenses in 2016, including advanced building technologies. A few factors are hampering facility managers from taking full advantage of building data, the survey indicated. Seventy percent of facility managers said that their building management staff is very or extremely skilled in data analysis, but only 27% utilize data-driven analytics solutions for building management.
Key barriers to uptake include the amount of funding required (39% say that is a top concern), and a lack of internal resources available to interpret data into actionable results (31% report that as a top concern). Only 26% of respondents feel that available building information is totally adequate for facility maintenance planning. A majority of respondents cited room for improvement in this area, and only 15% said that they fully utilize predictive maintenance tools to proactively assess and target equipment maintenance.
“Facility professionals need to be able to better visualize what’s happening across their footprint and make educated decisions to correct and improve conditions,” said Brett Wheless, director of field services, Schneider Electric. “More than half of facility managers are still largely reactive when it comes to maintaining building systems, which can have major impacts on occupant comfort and can decrease the life of the building. We are now seeing a change in attitude among facility professionals that is driving them to think differently about the way they collect and assimilate building data.”
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.