The Environmental Protection Agency’s 2017 Construction General Permit (CGP) went into effect on Feb. 16.
This permit requires compliance with effluent limits and other permit requirements, including the development of a Stormwater Pollution Prevention Plan. A CGP is required for most sites that will disturb one or more acres of land.
Companies that intend to seek coverage under EPA's 2017 CGP must submit a Notice of Intent (NOI) using the NPDES eReporting Tool for the CGP to certify the permit’s eligibility conditions and that the entity will comply with the permit’s requirements. An operator of a site with 2012 CGP coverage where construction activities began prior toFebruary 16, 2017 is required to submit a new NOI for coverage under the 2017CGP using NeT-CGP by May 17, 2017.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.