The Environmental Protection Agency ruled that the use of coal ash produced in power plants can continue to be incorporated into construction materials.
“Today's decision by the EPA to set performance standards for the safe disposal of coal combustion waste preserves what is one of the most successful commercial recycling programs in use today, the use of fly ash in concrete, asphalt, grout, and other construction materials,” said Stephen E. Sandherr, chief executive officer of the Associated General Contractors of America. “As a result, the construction industry will be able to continue to recycle an estimated 30% of these combustion byproducts each year.”
“Our association and its members went to great lengths to make sure that EPA officials appreciated that the construction industry has successfully and safely used fly ash in concrete and other materials for over six decades,” Sandherr said. “EPA officials understand that allowing this recycling program to continue will address many of the disposal challenges the energy industry faces with fly ash.”
(http://www.agc.org/cs/news_media/press_room/press_release?pressrelease.id=1680)
Related Stories
Codes and Standards | May 15, 2020
European cities to revamp transportation after pandemic reopening
Road closures, new rules for public transit will be imposed.
Codes and Standards | May 14, 2020
Washington State construction industry restart plan has three phases
In state with earliest COVID-19 cases, advisory group developing priorities based on risk.
Codes and Standards | May 14, 2020
More mass timber beam and column options available in the U.S.
Freres Lumber unveils new line of structural elements suitable for high-rise buildings.
Codes and Standards | May 13, 2020
Researchers flag insufficient training for construction workers on healthcare projects
May contribute to fungal disease outbreaks that endanger patients
Codes and Standards | May 8, 2020
New NIBS report evaluates natural disaster mitigation strategies
Document examines strengthening buildings for flood, wind, wildfires, and earthquakes.
Codes and Standards | May 6, 2020
A few ways contractors can manage COVID-19 risks
Staggered start times, rigorous tool cleaning, virtual training among the strategies.
Codes and Standards | May 5, 2020
NAHB loses influence in 2021 IECC building code development
Despite objections from the National Association of Home Builders (NAHB), the development of the 2021 International Energy Conservation Code (IECC) is nearing conclusion. NAHB objected to several more stringent energy efficiency provisions.
Codes and Standards | May 5, 2020
2020 IECC will lead to significant carbon emissions reductions
New model building code nearly finalized.
Codes and Standards | May 4, 2020
New York expands prevailing wage law
Now includes private projects with 30% or more of public subsidies.
Codes and Standards | May 1, 2020
OSHA says most employers don’t have to track worker COVID-19 infections
Agency clarifies responsibility for contractors, others.