flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

EPA finalizes first major update to Lead and Copper rule

Codes and Standards

EPA finalizes first major update to Lead and Copper rule

Will accelerate pace of lead service line replacement.


By Peter Fabris, Contributing Editor | January 5, 2021

Courtesy Pixabay

The Environmental Protection Agency has finalized the first major update to the agency’s Lead and Copper Rule (LCR) in nearly 30 years.

The update strengthens every aspect of the LCR and accelerates actions that reduce lead in drinking water to better protect children from lead exposure, according to an EPA news release. “For the first time in nearly 30 years, this action incorporates best practices and strengthens every aspect of the rule, including closing loopholes, accelerating the real world pace of lead service line replacement, and ensuring that lead pipes will be replaced in their entirety,” said EPA Administrator Andrew Wheeler.

“The U.S. has made tremendous progress in lowering children’s blood lead levels by phasing lead out of gasoline, banning lead paint, and implementing the old LCR,” the news release says. “However, the old rule included deficiencies that are fixed by EPA’s new Lead and Copper Rule. For example, the old rule created so many loopholes that only 1% of utilities actually replaced lead pipes as a result of an action level exceedance.”

In older homes and buildings, lead can leach from service lines, solder, and fixtures into tap water and become a significant source of lead exposure. In children, lead exposure can cause irreversible and life-long health effects, including decreasing IQ, focus, and academic achievement.

Related Stories

| Feb 6, 2013

BOMA favors voluntary energy benchmarking and disclosure, opposes mandates

The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.

| Feb 6, 2013

Lumber Standard Committee approves new Southern Pine design value changes

The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.

| Feb 6, 2013

CEIR seeks public input on draft of PV racking and attachment document

The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.

| Feb 6, 2013

Insurance Institute demonstration shows advantages of following wind resistance standards

A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.

| Jan 31, 2013

Proposed ASHRAE legionellosis prevention standard open for third public comment

Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.

| Jan 31, 2013

More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert

The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.

| Jan 31, 2013

California Building Standards Commission adopts 2013 code update

The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.

| Jan 25, 2013

D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives

The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.

| Jan 25, 2013

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Plug loads illustrate how much end-users impact overall building energy use.

| Jan 25, 2013

ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2

A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021