flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards


By BD+C Staff | January 25, 2013

Plug loads—the energy consumed by what building users plug into a socket rather than the energy it takes to heat or light a room—illustrates how much end-users impact overall building energy use. To be able to achieve a Net-Zero Energy Building, the ‘plug load problem’ should be incorporated into early energy modeling for the building. In addition, creating an education process whereby end-users (if known) understand the effects of their actions on overall building energy use is a key step towards achieving the highest level of green standards.

Click here for more info.

Related Stories

| Jun 2, 2014

Parking structures group launches LEED-type program for parking garages

The Green Parking Council, an affiliate of the International Parking Institute, has launched the Green Garage Certification program, the parking industry equivalent of LEED certification.

| May 28, 2014

Commercial building measurement standard could meet resistance from owners

For some building owners, a new measurement standard could mean that their building would shrink in size and lose value.

| May 28, 2014

Resiliency measures for hurricanes can help with tornadoes

Architect Butch Grimes, who examined the wreckage after a half-mile tornado struck Tuscaloosa, Ala., believes toughening building codes can reduce damage from twisters.

| May 28, 2014

Rooftop wind turbines becoming green status symbol in New York City

New York City developers are using rooftop wind turbines in an effort to attract buyers by highlighting a building’s green credentials.

| May 28, 2014

Peer review process under way for the WELL Building Standard

The standard is the first protocol of its kind that focuses on improving human wellness within the built environment by identifying specific conditions that, when holistically integrated into building interiors, enhance the health and wellbeing of the occupants.

| May 22, 2014

ASHRAE releases best practice guide for liquid cooling systems in data centers

The publication provides guidelines on interface requirements between chilled-water systems and technology cooling systems and on the requirements of liquid-cooled systems that attach to a datacom electronics rack.

| May 22, 2014

Colorado approves $4.2B data center said to be invulnerable to power outages

The Niobrara Data Center Energy Park project in Colorado will be the first data center to be fully self-contained with its own self-generated energy production facility.

| May 22, 2014

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

Preliminary DOE analysis shows that the ASHRAE/IES’s 2013 energy efficiency standard contains energy savings over the 2010 standard of 8.5% source energy and 7.6% site energy.

| May 22, 2014

Federal disaster policy should focus on mitigation, insurance group says

Federal disaster policy should shift its focus toward mitigation in order to reduce future disaster costs, the National Association of Mutual Insurance Companies says.

| May 22, 2014

Study quantifies cost premiums for net zero buildings

The 73-page report breaks down the incremental cost premiums for transforming three LEED Platinum-designed buildings into net-zero energy, net-zero water, and living Buildings. 

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021