flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Energy Department sets green building standards for federal agencies

Energy Department sets green building standards for federal agencies

LEED Silver may be used, and in some instances, the Green Globes program may be substituted.


By Peter Fabris, Contributing Editor | October 16, 2014
Byron G. Rogers U.S. Courthouse, Denver. Photo: courtesy GSA
Byron G. Rogers U.S. Courthouse, Denver. Photo: courtesy GSA

A new regulation by the U.S. Department of Energy mandates which private-sector green building certifications can be used in federal buildings to meet energy-efficiency standards. The rule, which goes into effect Nov. 13, says that when agencies use green building certification systems to meet federal sustainability standards, they must choose a system that verifies enhanced energy and water efficiency. 

LEED Silver may be used, and in some instances, the Green Globes program may be substituted.

The private-sector certifications do not replace the government’s green building standards, but as required under 2007’s major energy law, the regulation provides federal agencies and private real estate companies an alternative way of certifying compliance. The department is allowing LEED Silver under the rule because Congress dictated it in the law.

A requirement provides for building re-assessments at least every four years to ensure energy and water savings continue well beyond the initial building opening or retrofit, the agency says. DOE will provide a webinar discussing the rule’s requirements in November.

(http://thehill.com/policy/energy-environment/220383-doe-sets-new-green-standard-certifications-for-federal-buildings)

Related Stories

Codes and Standards | May 18, 2020

California’s grid can support all-electric buildings

Load-shifting will help reduce peak demand.

Codes and Standards | May 15, 2020

European cities to revamp transportation after pandemic reopening

Road closures, new rules for public transit will be imposed.

Codes and Standards | May 14, 2020

Washington State construction industry restart plan has three phases

In state with earliest COVID-19 cases, advisory group developing priorities based on risk.

Codes and Standards | May 14, 2020

More mass timber beam and column options available in the U.S.

Freres Lumber unveils new line of structural elements suitable for high-rise buildings.

Codes and Standards | May 13, 2020

Researchers flag insufficient training for construction workers on healthcare projects

May contribute to fungal disease outbreaks that endanger patients

Codes and Standards | May 8, 2020

New NIBS report evaluates natural disaster mitigation strategies

Document examines strengthening buildings for flood, wind, wildfires, and earthquakes.

Codes and Standards | May 6, 2020

A few ways contractors can manage COVID-19 risks

Staggered start times, rigorous tool cleaning, virtual training among the strategies.

Codes and Standards | May 5, 2020

NAHB loses influence in 2021 IECC building code development

Despite objections from the National Association of Home Builders (NAHB), the development of the 2021 International Energy Conservation Code (IECC) is nearing conclusion. NAHB objected to several more stringent energy efficiency provisions.

Codes and Standards | May 5, 2020

2020 IECC will lead to significant carbon emissions reductions

New model building code nearly finalized.

Codes and Standards | May 4, 2020

New York expands prevailing wage law

Now includes private projects with 30% or more of public subsidies.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021