flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

The positive results may lead to new standard for state commercial building energy codes


By BD+C Staff | May 22, 2014
UT Dallas 74,000-sf Student Services Building, the first academic structure in T
UT Dallas 74,000-sf Student Services Building, the first academic structure in Texas to be rated a LEED Platinum facility by the

Preliminary analysis from the U.S. Department of Energy (DOE) shows that the ASHRAE/IES’s 2013 energy efficiency standard contains energy savings over the 2010 standard of 8.5% source energy and 7.6% site energy.

As a result, DOE could establish the 2013 standard as the commercial building reference standard for state building energy codes. Today, states must meet or exceed the 2010 ASHRAE standard—the commercial building reference standard for state building energy codes under the federal Energy Conservation and Production Act.

DOE says the energy savings reflect improvements in ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings, which includes provisions related to better lighting, fans, commercial refrigeration, boilers, and controls. DOE is now accepting comments on this preliminary determination.

The 2013 standard contains 52 positive impacts on energy efficiency including:

•    Control requirements for lighting alternations
•    New requirements for individual fans
•    Reduction of energy usage for large boilers
•    Reduction of fan energy usage
•    New efficiency requirements for commercial refrigeration
•    More controls in more spaces and reduction of time to reduction or shut off of those controls
•    Reduction of lighting power density in most building types

More information can be found at http://www.energycodes.gov/regulations/determinations.

(https://www.ashrae.org/news/2014/doe-takes-first-step-in-updating-national-reference-standard-for-commercial-buildings-to-90-1-2013)

Related Stories

MFPRO+ News | Jan 12, 2024

As demand rises for EV chargers at multifamily housing properties, options and incentives multiply

As electric vehicle sales continue to increase, more renters are looking for apartments that offer charging options.

Student Housing | Jan 12, 2024

UC Berkeley uses shipping containers to block protestors of student housing project

The University of California at Berkeley took the drastic step of erecting a wall of shipping containers to keep protestors out of a site of a planned student housing complex. The $312 million project would provide badly needed housing at the site of People’s Park. 

MFPRO+ News | Jan 8, 2024

Canada turns to 1940s strategy to speed up housing construction

To address a severe housing shortage, Prime Minister Justin Trudeau’s administration has begun a housing construction strategy pioneered in the years after World War 2. The government aims to use a catalog of pre-approved home designs to reduce the cost and time to construct homes.

Green | Jan 8, 2024

DOE releases RFI on developing national definition for a Zero Emissions Building

The Department of Energy released a Request for Information (RFI) for feedback from industry, academia, research laboratories, government agencies, and other stakeholders on a draft national definition for a Zero Emissions Building.

Codes and Standards | Jan 8, 2024

Australia to be first country to ban engineered stone countertops

In 2024, Australia will be the first country to ban engineered stone countertops. The ban came after a years-long campaign supported by doctors, trade unions, and workers over concerns that the material was causing increased silicosis cases among workers cutting and handling it.

Roofing | Jan 8, 2024

Researchers devise adaptive roof tile concept that adjusts to ambient temperatures

Scientists at the University of California Santa Barbara published a paper that proposes adaptive roof tile technology that can adjust to ambient temperatures. Using a wax motor, tiles could switch from a heating or cooling state enabling savings on heating and cooling costs.

Mass Timber | Jan 2, 2024

5 ways mass timber will reshape the design of life sciences facilities

Here are five reasons why it has become increasingly evident that mass timber is ready to shape the future of laboratory spaces. 

Resiliency | Jan 2, 2024

Americans are migrating from areas of high flood risk

Americans are abandoning areas of high flood risk in significant numbers, according to research by the First Street Foundation. Climate Abandonment Areas account for more than 818,000 Census Blocks and lost a total of 3.2 million-plus residents due to flooding from 2000 to 2020, the study found.

Sustainability | Jan 2, 2024

Los Angeles has plan to improve stormwater capture and source 80% of water locally

Los Angeles County’s Board of Supervisors voted for a plan to improve stormwater capture with a goal of capturing it for local reuse. The plan aims to increase the local water supply by 580,000 acre-feet per year by 2045.

MFPRO+ News | Jan 2, 2024

New York City will slash regulations on housing projects

New York City Mayor Eric Adams is expected to cut red tape to make it easier and less costly to build housing projects in the city. Adams would exempt projects with fewer than 175 units in low-density residential areas and those with fewer than 250 units in commercial, manufacturing, and medium- and high-density residential areas from environmental review. 

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021