Back in the halcyon days of 2006, energy analysis of building design and performance was a luxury. Sure, many forward-thinking AEC firms ran their designs through services such as Autodesk’s Green Building Studio and IES’s Virtual Environment, and some facility managers used Honeywell’s Energy Manager and other monitoring software. Today, however, knowing exactly how much energy your building will produce and use is survival of the fittest as energy costs and green design requirements demand precision.
“Energy is now a variable cost on the balance sheet, particularly with healthcare projects,” says Greg Turner, director of global offerings, Honeywell Building Solutions. “What we see happening for facilities managers is they’re talking to CFOs more regularly and the question is always. ‘What’s my energy cost going to be next quarter?’”
Building Teams and facility managers are using these energy analysis tools to keep clients’ bottom lines low and meet regulatory requirements for energy saving.
Green Building Studio: Innumerable design iterations
Green Building Studio is a Web-based tool that can help architects and designers perform whole building analysis, optimize energy efficiency, and work toward carbon neutrality earlier in the design process. Available via subscription service at www.greenbuildingstudio.com, Green Building Studio uses the DOE-2.2 simulation engine to calculate energy performance. It also creates geometrically accurate input files for EnergyPlus, the Department of Energy’s building simulation program. Crucial to the integrated interoperability of the program is the gbXML schema, an open XML schema of the International Alliance of Interoperability’s aecXML group. By using gbXML-enabled applications, Green Building Studio Web service users can eliminate redundant data entry and dramatically reduce the time and expense traditionally associated with whole-building energy simulation analyses.
“Our users will perform 50 to 100 iterations of a design,” says John Kennedy, senior manager, sustainable analysis products for Autodesk AEC Solutions and the CEO of GBS from its founding in 2004 through its acquisition by Autodesk in 2008. “They try out everything from type of glass to different levels of insulation, and each iteration requires a full simulation for proper energy use estimates. Running off of the Web, our users can run these calculations from the cloud and perform them a lot faster than if they were tied to their desktop resources.”
Engineering firm Glumac, based in Portland, Ore., uses GBS for energy analysis on many of its projects, such as the University of Hawaii at Manoa Recreation Center. Glumac’s scope of work included design review, whole building energy simulation, computational fluid dynamics analysis for natural ventilation, and sustainability consulting. The 67,000-sf project includes activity courts, locker rooms, aerobics facilities, and free weights. Glumac used GBS to quickly iterate energy consumption estimates for a variety of exterior shading devices, understanding energy use driven by landscape shading elements, and the effects of several different glazing configurations.
“Traditional analysis would have been too cumbersome to address these questions within our budget or within a fast enough timeframe to provide meaningful feedback to the design team,” says Skander Spies, an energy analyst in Glumac’s Portland office. Glumac created the initial geometry in Revit, then was able to import it into Green Building Studio and export a file compatible with other advanced analysis tools, such as EnergyPlus or eQuest. “This process results in more geometrically accurate models that take less time and budget to create, allowing our team to spend more time looking at the issues that matter,” says Spies.
In its most recent subscription update, Autodesk made the GBS service available to anyone with a Revit Architecture or Revit MEP subscription and integrated its features into Revit’s massing feature. Now, energy results are automatically updated in Revit, the company’s native building information modeling program.
“Building owners are asking more often for in-depth analysis,” says Autodesk’s Kennedy. “They want stronger performance guarantees for both new designs and renovations, and they’re asking about the drivers of building performance. We’re moving in the direction of making that data a normal, automated process.”
IESVE: Integrating documentation and design
Integrated Environmental Solutions was founded in 1994 in Scotland with the goal of developing primarily academic tools for building performance design and analysis and bringing them into mainstream use, according to founder and managing director Don McLean. In the interim, the company has launched commercially viable software that has grown to encompass design and analysis for all building design disciplines. Its products span a range of price and performance levels from the free and easy to the most detailed and rigorous.
IES’s main tool is its Virtual Environment (VE) Pro, a suite of software that integrates the entire process of designing buildings for environmental and energy considerations. Each module of the VE suite—for example, VE/Mechanical, VE/Electrical, or VE/Lighting—is tailored to analyze specific performance components of buildings. VE/Thermal includes energy performance measurement tools such as Apache SIM, Apache HVAC, and MacroFlo for total building and room-by-room energy calculation, simulation, and HVAC system design. VE Pro includes a full 3D modeling program for AEC professionals who want to create their designs natively. It can also import from Revit, SketchUp, or the gbXML file formats.
“You can perform the level of analysis you want all in one platform,” says Suzanne Robinson, an energy consultant at IES. “How detailed your building becomes is up to the user. We just want to engage them from the beginning in the design stage.”
VE Pro users can create baselines that integrate documentation in their design processes. The program’s LEED toolkit keeps track of compliance with LEED criteria and points across LEED-NC V2.2/V3, LEED for Schools V1/V3, and LEED Core and Shell V2/V3. The Sustainability VE toolkit tracks climate, natural resources, building metrics, construction materials, energy, carbon, daylight, solar shading, water, low- and zero-carbon technologies, and ASHRAE/CIBSE heating and cooling loads.
“It’s such a robust software engine we can more easily model complex designs,” says Mark Chu, a building physicist in AECOM’s advanced design group, based in Orange, Calif. “We can model things that we couldn’t before because the software isn’t constrained.”
Some of the projects AECOM has used VE Pro for energy modeling include the NASA Ames N232 Collaborative Support Building (registered for LEED Platinum) and NASA Johnson Space Center Building 26 (registered for LEED Gold).
Honeywell Energy Manager: Pinpoint performance issues
Energy Manager is a Web-based advanced energy management and information system designed to capture, analyze, and act on data to help solve energy problems in existing buildings. Energy Manager’s software uses an existing building’s in-place infrastructure to track energy dollars, impact of weather on consumption, and similar energy-related issues.
If a room or floor has leaky windows, Energy Manager can isolate higher heating costs in that area and report the problem back to the facility manager. It also uses diagnostics to show metrics and behaviors of pieces of equipment to be analyzed for peak performance. Energy Manager’s data can be accessed anywhere from the Web and can be used to set up daily or weekly weather-neutralized energy consumption reports e-mailed directly to supervisors.
“It’s designed to mine data,” Turner says. “You can create as many virtual metering solutions as your building needs. It’s designed to let customers add the functionality they need without adding new systems.” BD+C
—Jeff Yoders, Contributing Editor
Related Stories
High-rise Construction | Dec 7, 2022
SOM reveals its design for Singapore’s tallest skyscraper
Skidmore, Owings & Merrill (SOM) has revealed its design for 8 Shenton Way—a mixed-use tower that will stand 63 stories and 305 meters (1,000 feet) high, becoming Singapore’s tallest skyscraper. The design team also plans to make the building one of Asia’s most sustainable skyscrapers. The tower incorporates post-pandemic design features.
Office Buildings | Dec 7, 2022
Software giant SAP opens engineering academy for its global engineering workforce
Software giant SAP has opened its new SAP Academy for Engineering on the company’s San Ramon, Calif. campus. Designed by HGA, the Engineering Academy will provide professional development opportunities for SAP’s global engineering workforce. At the Engineering Academy, cohorts from SAP offices across the globe will come together for intensive, six-month training programs.
Multifamily Housing | Dec 7, 2022
Canada’s largest net-zero carbon residential community to include affordable units
The newly unveiled design for Canada’s largest net-zero carbon residential community includes two towers that will create a new destination within Ottawa and form a striking gateway into LeBreton Flats. The development will be transit-oriented, mixed-income, mixed-use, and include unprecedented sustainability targets. Dream LeBreton is a partnership between real estate companies Dream Asset Management, Dream Impact, and local non-profit MultiFaith Housing Initiative.
Student Housing | Dec 7, 2022
Cornell University builds massive student housing complex to accommodate planned enrollment growth
In Ithaca, N.Y., Cornell University has completed its North Campus Residential Expansion (NCRE) project. Designed by ikon.5 architects, the 776,000-sf project provides 1,200 beds for first-year students and 800 beds for sophomore students. The NCRE project aimed to accommodate the university’s planned growth in student enrollment while meeting its green infrastructure standards. Cornell University plans to achieve carbon neutrality by 2035.
Office Buildings | Dec 6, 2022
‘Chicago’s healthiest office tower’ achieves LEED Gold, WELL Platinum, and WiredScore Platinum
Goettsch Partners (GP) recently completed 320 South Canal, billed as “Chicago’s healthiest office tower,” according to the architecture firm. Located across the street from Chicago Union Station and close to major expressways, the 51-story tower totals 1,740,000 sf. It includes a conference center, fitness center, restaurant, to-go market, branch bank, and a cocktail lounge in an adjacent structure, as well as parking for 324 cars/electric vehicles and 114 bicycles.
Multifamily Housing | Dec 6, 2022
Austin's new 80-story multifamily tower will be the tallest building in Texas
Recently announced plans for Wilson Tower, a high-rise multifamily building in downtown Austin, Texas, indicate that it will be the state’s tallest building when completed. The 80-floor structure will rise 1,035 feet in height at 410 East 5th Street, close to the 6th Street Entertainment District, Austin Convention Center, and a new downtown light rail station.
Geothermal Technology | Dec 6, 2022
Google spinoff uses pay-as-you-go business model to spur growth in geothermal systems
Dandelion Energy is turning to a pay-as-you-go plan similar to rooftop solar panel leasing to help property owners afford geothermal heat pump systems.
Contractors | Dec 6, 2022
Slow payments cost the construction industry $208 billion in 2022
The cost of floating payments for wages and invoices represents $208 billion in excess cost to the construction industry, a 53% increase from 2021, according to a survey by Rabbet, a provider of construction finance software.
Mixed-Use | Dec 6, 2022
Houston developer plans to convert Kevin Roche-designed ConocoPhillips HQ to mixed-use destination
Houston-based Midway, a real estate investment, development, and management firm, plans to redevelop the former ConocoPhillips corporate headquarters site into a mixed-use destination called Watermark District at Woodcreek.
Office Buildings | Dec 5, 2022
How to foster collaboration and inspiration for a workplace culture that does not exist (yet)
A building might not be able to “hack” innovation, but it can create the right conditions to foster connection and innovation, write GBBN's Chad Burke and Zachary Zettler.