Back in the halcyon days of 2006, energy analysis of building design and performance was a luxury. Sure, many forward-thinking AEC firms ran their designs through services such as Autodesk’s Green Building Studio and IES’s Virtual Environment, and some facility managers used Honeywell’s Energy Manager and other monitoring software. Today, however, knowing exactly how much energy your building will produce and use is survival of the fittest as energy costs and green design requirements demand precision.
“Energy is now a variable cost on the balance sheet, particularly with healthcare projects,” says Greg Turner, director of global offerings, Honeywell Building Solutions. “What we see happening for facilities managers is they’re talking to CFOs more regularly and the question is always. ‘What’s my energy cost going to be next quarter?’”
Building Teams and facility managers are using these energy analysis tools to keep clients’ bottom lines low and meet regulatory requirements for energy saving.
Green Building Studio: Innumerable design iterations
Green Building Studio is a Web-based tool that can help architects and designers perform whole building analysis, optimize energy efficiency, and work toward carbon neutrality earlier in the design process. Available via subscription service at www.greenbuildingstudio.com, Green Building Studio uses the DOE-2.2 simulation engine to calculate energy performance. It also creates geometrically accurate input files for EnergyPlus, the Department of Energy’s building simulation program. Crucial to the integrated interoperability of the program is the gbXML schema, an open XML schema of the International Alliance of Interoperability’s aecXML group. By using gbXML-enabled applications, Green Building Studio Web service users can eliminate redundant data entry and dramatically reduce the time and expense traditionally associated with whole-building energy simulation analyses.
“Our users will perform 50 to 100 iterations of a design,” says John Kennedy, senior manager, sustainable analysis products for Autodesk AEC Solutions and the CEO of GBS from its founding in 2004 through its acquisition by Autodesk in 2008. “They try out everything from type of glass to different levels of insulation, and each iteration requires a full simulation for proper energy use estimates. Running off of the Web, our users can run these calculations from the cloud and perform them a lot faster than if they were tied to their desktop resources.”
Engineering firm Glumac, based in Portland, Ore., uses GBS for energy analysis on many of its projects, such as the University of Hawaii at Manoa Recreation Center. Glumac’s scope of work included design review, whole building energy simulation, computational fluid dynamics analysis for natural ventilation, and sustainability consulting. The 67,000-sf project includes activity courts, locker rooms, aerobics facilities, and free weights. Glumac used GBS to quickly iterate energy consumption estimates for a variety of exterior shading devices, understanding energy use driven by landscape shading elements, and the effects of several different glazing configurations.
“Traditional analysis would have been too cumbersome to address these questions within our budget or within a fast enough timeframe to provide meaningful feedback to the design team,” says Skander Spies, an energy analyst in Glumac’s Portland office. Glumac created the initial geometry in Revit, then was able to import it into Green Building Studio and export a file compatible with other advanced analysis tools, such as EnergyPlus or eQuest. “This process results in more geometrically accurate models that take less time and budget to create, allowing our team to spend more time looking at the issues that matter,” says Spies.
In its most recent subscription update, Autodesk made the GBS service available to anyone with a Revit Architecture or Revit MEP subscription and integrated its features into Revit’s massing feature. Now, energy results are automatically updated in Revit, the company’s native building information modeling program.
“Building owners are asking more often for in-depth analysis,” says Autodesk’s Kennedy. “They want stronger performance guarantees for both new designs and renovations, and they’re asking about the drivers of building performance. We’re moving in the direction of making that data a normal, automated process.”
IESVE: Integrating documentation and design
Integrated Environmental Solutions was founded in 1994 in Scotland with the goal of developing primarily academic tools for building performance design and analysis and bringing them into mainstream use, according to founder and managing director Don McLean. In the interim, the company has launched commercially viable software that has grown to encompass design and analysis for all building design disciplines. Its products span a range of price and performance levels from the free and easy to the most detailed and rigorous.
IES’s main tool is its Virtual Environment (VE) Pro, a suite of software that integrates the entire process of designing buildings for environmental and energy considerations. Each module of the VE suite—for example, VE/Mechanical, VE/Electrical, or VE/Lighting—is tailored to analyze specific performance components of buildings. VE/Thermal includes energy performance measurement tools such as Apache SIM, Apache HVAC, and MacroFlo for total building and room-by-room energy calculation, simulation, and HVAC system design. VE Pro includes a full 3D modeling program for AEC professionals who want to create their designs natively. It can also import from Revit, SketchUp, or the gbXML file formats.
“You can perform the level of analysis you want all in one platform,” says Suzanne Robinson, an energy consultant at IES. “How detailed your building becomes is up to the user. We just want to engage them from the beginning in the design stage.”
VE Pro users can create baselines that integrate documentation in their design processes. The program’s LEED toolkit keeps track of compliance with LEED criteria and points across LEED-NC V2.2/V3, LEED for Schools V1/V3, and LEED Core and Shell V2/V3. The Sustainability VE toolkit tracks climate, natural resources, building metrics, construction materials, energy, carbon, daylight, solar shading, water, low- and zero-carbon technologies, and ASHRAE/CIBSE heating and cooling loads.
“It’s such a robust software engine we can more easily model complex designs,” says Mark Chu, a building physicist in AECOM’s advanced design group, based in Orange, Calif. “We can model things that we couldn’t before because the software isn’t constrained.”
Some of the projects AECOM has used VE Pro for energy modeling include the NASA Ames N232 Collaborative Support Building (registered for LEED Platinum) and NASA Johnson Space Center Building 26 (registered for LEED Gold).
Honeywell Energy Manager: Pinpoint performance issues
Energy Manager is a Web-based advanced energy management and information system designed to capture, analyze, and act on data to help solve energy problems in existing buildings. Energy Manager’s software uses an existing building’s in-place infrastructure to track energy dollars, impact of weather on consumption, and similar energy-related issues.
If a room or floor has leaky windows, Energy Manager can isolate higher heating costs in that area and report the problem back to the facility manager. It also uses diagnostics to show metrics and behaviors of pieces of equipment to be analyzed for peak performance. Energy Manager’s data can be accessed anywhere from the Web and can be used to set up daily or weekly weather-neutralized energy consumption reports e-mailed directly to supervisors.
“It’s designed to mine data,” Turner says. “You can create as many virtual metering solutions as your building needs. It’s designed to let customers add the functionality they need without adding new systems.” BD+C
—Jeff Yoders, Contributing Editor
Related Stories
K-12 Schools | Apr 30, 2024
Fully electric Oregon elementary school aims for resilience with microgrid design
The River Grove Elementary School in Oregon was designed for net-zero carbon and resiliency to seismic events, storms, and wildfire. The roughly 82,000-sf school in a Portland suburb will feature a microgrid—a small-scale power grid that operates independently from the area’s electric grid.
AEC Tech | Apr 30, 2024
Lack of organizational readiness is biggest hurdle to artificial intelligence adoption
Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI.
Codes and Standards | Apr 30, 2024
Updated document details methods of testing fenestration for exterior walls
The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015.
MFPRO+ News | Apr 29, 2024
World’s largest 3D printer could create entire neighborhoods
The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.
K-12 Schools | Apr 29, 2024
Tomorrow's classrooms: Designing schools for the digital age
In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.
Adaptive Reuse | Apr 29, 2024
6 characteristics of a successful adaptive reuse conversion
In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.
AEC Innovators | Apr 26, 2024
National Institute of Building Sciences announces Building Innovation 2024 schedule
The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more.
Mass Timber | Apr 25, 2024
Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas
Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.
Sports and Recreational Facilities | Apr 25, 2024
How pools can positively affect communities
Clark Nexsen senior architects Jennifer Heintz and Dorothea Schulz discuss how pools can create jobs, break down barriers, and create opportunities within communities.
Senior Living Design | Apr 24, 2024
Nation's largest Passive House senior living facility completed in Portland, Ore.
Construction of Parkview, a high-rise expansion of a Continuing Care Retirement Community (CCRC) in Portland, Ore., completed recently. The senior living facility is touted as the largest Passive House structure on the West Coast, and the largest Passive House senior living building in the country.