flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Design guide for sloped glazing and skylights updated for first time in 30 years

Codes and Standards

Design guide for sloped glazing and skylights updated for first time in 30 years

Helps with choosing proper glass for non-residential applications.


By Peter Fabris, Contributing Editor | March 12, 2020

The Fenestration and Glazing Industry Alliance (FGIA) has updated a guide outlining considerations necessary for choosing glass for non-residential skylight and sloped glazing applications.

AAMA GDSG-1, Design Guide for Sloped Glazing and Skylights, an FGIA standard, describes the minimum requirements for sloped glazing as specified in the International Building Code (IBC). It was last updated in 1987, when it was first created.

“This design guide is intended to provide the responsible sloped glazing designer the necessary guidance in selecting the proper glass construction for non-residential skylight and sloped glazing applications where the glass is inclined 15 degrees or more from the vertical,” said Randy Heather (VELUX), chair of the Skylight Selection and Daylighting Design Guide Task Group. “Proper glass construction is intended to meet specified design loads and reduce the probability of glass breakage.

“Guidance is provided as to the types of loads to which a sloped glazing product may be subjected,” Heather said. “It discusses many of the differences in design considerations between vertical glazing and sloped glazing which must be taken into account.”

Related Stories

Codes and Standards | May 24, 2018

‘Amazon tax’ could slow Seattle’s construction boom

City imposes employer head count tax to fund affordable housing.

Codes and Standards | May 23, 2018

AAMA releases 2017/2018 fenestration market studies

Offers forecasts of industry trends.

Codes and Standards | May 22, 2018

Registration open for 2018 National Energy Codes Conference

U.S. Department of Energy event to be held July 15th-17th in Austin.

Codes and Standards | May 21, 2018

New standard tests quietness of floors

ASTM International method will help manufacturers test their flooring materials.

Codes and Standards | May 17, 2018

California will require solar panels on most new homes

Projected to add $10,000 to cost of new homes.

Codes and Standards | May 16, 2018

New resources offer tips on off-site construction

NIBS documents address using pre-cast concrete, and commercial and legal considerations of modular construction.

Codes and Standards | May 15, 2018

Blast testing of loaded mass timber structures yields positive results

Four tests covered a spectrum of blast loads.

Codes and Standards | May 14, 2018

Maryland makes general contractors liable for failure of subs to pay employees

GCs could have to pay for up to three times the wages owed.

Codes and Standards | May 10, 2018

Data collection, machine learning boost building efficiency

Sensors, software algorithms squeeze out waste.

Codes and Standards | May 9, 2018

OSHA and state safety agencies write more than 100 silica citations in 6 months

Actions tending to come with investigation of other site conditions.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021