flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Design guide offers details on rain loads and ponding on roofs

Standards

Design guide offers details on rain loads and ponding on roofs

The design guide is focused on roof systems that resist water accumulation and any resulting instability.


By Peter Fabris, Contributing Editor | April 22, 2024
Image by Christopher Amend from Pixabay

Image by Christopher Amend from Pixabay

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding.

Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability. It includes an in-depth review of rain loads and ponding effects to help design professionals properly and efficiently design for ponding on roofs constructed with structural steel, open web steel joists, and joist girders.

It also contains several recommended methods of analysis that can be used to consider the effects of ponding, methods of design accounting for ponding effects, and a presentation of the SJI Roof Bay Analysis Tool, along with design examples that illustrate the concepts discussed.

Design Guide 40 is available for download at aisc.org/dg.

Related Stories

Standards | Sep 18, 2015

2014 construction deaths up 6% from 2013

Highest number of fatalities since 2008

Multifamily Housing | Jul 16, 2015

Minneapolis relaxes parking requirements on new multifamily buildings

The city cut the number of spots required for large developments by half. It also will accept plans with no parking spaces in certain cases.

Codes and Standards | Jul 16, 2015

Berkeley, Calif., adopts balcony inspection program following deadly collapse

Apartment building balconies will be subject to inspections every three years under new regulations adopted following a deadly collapse.

Codes and Standards | Jul 16, 2015

Oregon to spend $300 million for seismic updates on public buildings

A survey found that more than 1,000 Oregon school buildings face a high risk of collapse during earthquakes.

Codes and Standards | Jun 24, 2015

Maryland’s Prince George County turns to P3s to build green infrastructure

Over the next 10 years, the county must convert 15,000 acres of watertight surfaces—almost 5% of the county's total area—into surfaces that absorb or treat rainwater. 

Codes and Standards | Jun 24, 2015

Philadelphia considers more incentives for green building

Developers could be allowed additional height, floor area on projects that meet benchmarks.

Codes and Standards | Jun 24, 2015

LEED building at Duke University may be retrofitted to prevent bird deaths

More birds die from colliding with buildings at Duke than on any other campus in a 45-school survey conducted by Augustana College. Duke is located along the Atlantic Flyway, a bird migration route. 

Codes and Standards | Jun 24, 2015

Balcony collapse in Berkeley, Calif., prompts an examination of codes

Dry rot and too much weight appear to be the causes of a fatal accident at an eight-year-old building in Berkeley, Calif. 

Codes and Standards | Jun 18, 2015

Guides to wood construction in high wind areas updated

The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.

Codes and Standards | Jun 18, 2015

New document addresses school safety and security

In an effort to balance security and fire safety features within codes, standards and planning, NFPA hosted a two-day workshop, “School Safety, Codes and Security”, last December. The findings are now available in an NFPA report.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021