flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Dept. of Energy says 2016 ANSI/ASHRAE/IES Standard 90.1 would save 8.2% of energy costs

Codes and Standards

Dept. of Energy says 2016 ANSI/ASHRAE/IES Standard 90.1 would save 8.2% of energy costs

Favorable comparison to 2013 standard for commercial buildings.


By Peter Fabris, Contributing Editor | March 7, 2018

The U.S. Department of Energy (DOE) has issued a determination that ANSI/ASHRAE/IES Standard 90.1-2016 will improve energy efficiency in commercial buildings.

The department’s analysis found that buildings meeting 90.1-2016 would result in national energy cost savings of about 8.2% compared to the 2013 edition of the standard. DOE’s Building Energy Codes Program provides technical support for Standard 90.1 in order to increase energy efficiency and reduce waste in commercial buildings.

DOE is required by federal statute to review each newly published edition of the model code, and issue a determination as to whether the updated code will increase energy efficiency in commercial buildings. States are required to review their commercial building energy codes within two yearsfollowing an affirmative DOE determination, and certify that their codes meet or exceed the updated edition of Standard 90.1.

DOE also provides technical assistance to states submitting energy code certifications and requests for deadline extensions.

Related Stories

Codes and Standards | Feb 10, 2022

Intl. Code Council committee on diversity seeks applicants

New board aims to increase diversity in the membership association.

Codes and Standards | Feb 9, 2022

Climate impact of gas stoves in U.S. equal to half a million cars

New study could increase momentum to ban fossil fuels in new buildings.

Codes and Standards | Feb 7, 2022

Energy efficiency ratings not reflecting true energy use

Highest rated U.K. buildings are less efficient than lower rated ones.

Codes and Standards | Feb 3, 2022

Illinois tops USGBC list of states with the most LEED certified projects in 2021

Top 10 states plus D.C. certified more than 247 million gross square feet.

Codes and Standards | Feb 2, 2022

Public works contracting reform advances in New York State

Governor signs bill to form advisory council that will propose policy changes.

Codes and Standards | Feb 2, 2022

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.

Codes and Standards | Feb 1, 2022

Biden Administration launches state, local coalition to boost building performance standards

Will focus on energy efficiency and electrification across the buildings sector.

Codes and Standards | Jan 26, 2022

Downtown digital twin to aid Las Vegas in setting policy priorities

Will be used to address energy use, emissions, traffic, parking, noise, and emergency management.

Codes and Standards | Jan 25, 2022

Modeling tool helps compare options for HVAC systems when little known about a building

Compares projected costs and energy usage for all HVAC systems and hot water consumption.

Codes and Standards | Jan 25, 2022

Critics slam proposed revamp of California’s solar net energy metering rate

Could make rooftop solar panels unaffordable for most customers.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021