The U.S. Department of Energy and the National Labs have released updated versions of their open-source, whole-building energy modeling tools: the EnergyPlus engine and the OpenStudio software development kit and application.
EnergyPlus V8.7.0 includes the following enhancements:
- New features to support residential modeling including a new attic duct model and the Kiva ground heat exchange model.
- Support for non-rectangular windows.
- A new generalized fan model.
- Enhanced plant auto-sizing.
- Full support for variable speed DX coils.
- Regular expression support in output variables for easier report generation.
- A refactored output module for improved performance.
The release also includes resolutions and fixes to 50 known bugs and issues.
OpenStudio 2.1.0 has a new feature, a completely revamped Parametric Analysis Tool (PAT) application. The interface has been rewritten in JavaScript to leverage the browser-based Electron framework. The back end also uses the new OpenStudio 2.0 Server architecture, including OpenStudio Command Line Interface (CLI), OpenStudio Meta-CLI, and the new OpenStudio Workflow (OSW) and OpenStudio Analysis (OSA) file formats. The new PAT supports both local and cloud-based execution and adds support for “algorithmic” workflows like uncertainty quantification, design optimization, large-scale parametric analysis, and model input calibration that can automatically generate large numbers of runs. Use of the new file formats means that the new PAT is not compatible with PAT 1.X projects.
More information about all of DOE’s energy modeling software and research projects can be found at https://energy.gov/eere/build
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
