flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Dept. of Energy releases initial version of the Spawn of EnergyPlus software

Codes and Standards

Dept. of Energy releases initial version of the Spawn of EnergyPlus software

Targets new use cases in advanced controls, district systems, and grid integration.


By Peter Fabris, Contributing Editor | August 3, 2021

Courtesy Pixabay

The U.S. Department of Energy, the Lawrence Berkeley National Laboratory, and the National Renewable Energy Laboratory have released the initial version of the Spawn of EnergyPlus software.

The government entities collaborated with Modelon and Objexx Engineering on the new tool. Spawn is not a replacement for EnergyPlus and won’t be in the foreseeable future.

Like its progenitor, the new tool performs whole-building energy simulation, but it also targets new use cases in advanced controls, district systems, and grid integration. Spawn supports these new use cases by making fundamental use of coupled simulation via the Functional Mockup Interface standard.

It reuses the weather, envelope, lighting, and loads models from EnergyPlus and packages them as a single model. But it replaces EnergyPlus’ traditional, imperative, implicit, load-based HVAC and controls models with explicit declarative state-based models from the Modelica Buildings Library that are translated and automatically linked with the EnergyPlus model.

By combining models in different configurations, Spawn simulates either a single building or a collection of buildings linked by shared thermal, electrical, and control systems.

Related Stories

| Mar 15, 2012

ANSI approves new fall protection standards

The American National Standards Institute (ANSI) has approved two American Society of Safety Engineers' (ASSE) standards addressing fall protection.

| Mar 8, 2012

Engineering innovation provides new option for meeting seismic codes in skyscrapers

Two University of Toronto engineers have developed “viscoelastic-energy-dissipating dampers” to replace many of the heavy concrete beams used in tall structures.

| Mar 8, 2012

CSI webinar on building code compliance March 22

A March 22 webinar will provide an overview of a 28-step process during the design of a building to ensure compliance with building codes.

| Mar 8, 2012

Federal silica dust rule caught in bureaucratic limbo

A federal rule meant to protect the lungs of workers has been caught in bureaucratic purgatory for more than a year.

| Mar 8, 2012

New LEED-EBOM rating has requirements for specific project types

Several key changes are proposed for the LEED-EBOM Rating System in 2012.

| Mar 8, 2012

Green buildings more resilient than conventionally built structures

A new study by the U.S. Green Building Council (USGBC) and the University of Michigan’s Taubman College of Architecture and Urban Planning suggests that structures built to green standards can advance building resiliency.

| Mar 1, 2012

LEED Platinum standard likely to mean net-zero energy by 2018

As LEED standards continue to rise, the top level, LEED Platinum, will likely mean net-zero energy construction by 2018.

| Mar 1, 2012

EPA beefs up stormwater discharge rule from construction projects

The U.S. Environmental Protection Agency (EPA) has now finalized its 2012 construction general permit (CGP) that authorizes stormwater discharges from construction projects that disturb one or more acres of land in the areas where EPA is the permitting authority.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021