The U.S. Department of Energy, the Lawrence Berkeley National Laboratory, and the National Renewable Energy Laboratory have released the initial version of the Spawn of EnergyPlus software.
The government entities collaborated with Modelon and Objexx Engineering on the new tool. Spawn is not a replacement for EnergyPlus and won’t be in the foreseeable future.
Like its progenitor, the new tool performs whole-building energy simulation, but it also targets new use cases in advanced controls, district systems, and grid integration. Spawn supports these new use cases by making fundamental use of coupled simulation via the Functional Mockup Interface standard.
It reuses the weather, envelope, lighting, and loads models from EnergyPlus and packages them as a single model. But it replaces EnergyPlus’ traditional, imperative, implicit, load-based HVAC and controls models with explicit declarative state-based models from the Modelica Buildings Library that are translated and automatically linked with the EnergyPlus model.
By combining models in different configurations, Spawn simulates either a single building or a collection of buildings linked by shared thermal, electrical, and control systems.
Related Stories
Codes and Standards | Jun 24, 2015
Maryland’s Prince George County turns to P3s to build green infrastructure
Over the next 10 years, the county must convert 15,000 acres of watertight surfaces—almost 5% of the county's total area—into surfaces that absorb or treat rainwater.
Codes and Standards | Jun 24, 2015
Philadelphia considers more incentives for green building
Developers could be allowed additional height, floor area on projects that meet benchmarks.
Codes and Standards | Jun 24, 2015
LEED building at Duke University may be retrofitted to prevent bird deaths
More birds die from colliding with buildings at Duke than on any other campus in a 45-school survey conducted by Augustana College. Duke is located along the Atlantic Flyway, a bird migration route.
Codes and Standards | Jun 24, 2015
Balcony collapse in Berkeley, Calif., prompts an examination of codes
Dry rot and too much weight appear to be the causes of a fatal accident at an eight-year-old building in Berkeley, Calif.
Codes and Standards | Jun 18, 2015
Guides to wood construction in high wind areas updated
The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.
Codes and Standards | Jun 18, 2015
New document addresses school safety and security
In an effort to balance security and fire safety features within codes, standards and planning, NFPA hosted a two-day workshop, “School Safety, Codes and Security”, last December. The findings are now available in an NFPA report.
Codes and Standards | Jun 18, 2015
Two myths regarding NFPA 101 Life Safety Code debunked
NFPA life safety engineer Ron Coté settles the debate over second egress doors and exit signs.
Codes and Standards | Jun 18, 2015
How to prevent corrosion in sprinkler system piping
The technical committees responsible for NFPA 13, Installation of Sprinkler Systems, have been looking at ways to eliminate or reduce corrosion in sprinkler systems for several revision cycles.
Codes and Standards | Jun 11, 2015
Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide
Includes results of new tests and addresses IECC and ASHRAE compliance paths.
Codes and Standards | Jun 11, 2015
Helena, Mont., may charge commercial developers a fee to fund public art
The fee would apply to new construction or alteration of nonresidential buildings of at least 20,000 sf.