flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Department of Energy asks for feedback on cost-effectiveness of building energy codes

Codes and Standards

Department of Energy asks for feedback on cost-effectiveness of building energy codes

DOE’s RFI wants input on how to improve methodology on cost assessment.


By Peter Fabris, Contributing Editor | May 1, 2015
Department of Energy asks for feedback on cost-effectiveness of building energy codes

Image: Pixabay/werner22brigitte

The U.S. Department of Energy (DOE) has issued a Request for Information (RFI) in the Federal Register seeking input on how the Department may update and improve its methodology for assessing the cost-effectiveness of residential and commercial building energy codes

The methodology includes an energy savings assessment. DOE is directed by statute to provide technical assistance to states to support the implementation of model building energy codes. 

As part of this role, DOE conducts national and state-level analysis to assess the cost-effectiveness of building energy codes and proposed changes. DOE is interested in feedback on its analysis methodology, preferred sources of cost data, and parameter assumptions surrounding its cost-effectiveness assessment. 

In addition, DOE is seeking information on the general costs, benefits, and economic impacts associated with building energy codes. Additional information is available at Docket No. EERE-2015-BT-BC-0001. Interested parties are asked to comment by May 14, 2015.

Related Stories

Codes and Standards | Feb 10, 2022

Intl. Code Council committee on diversity seeks applicants

New board aims to increase diversity in the membership association.

Codes and Standards | Feb 9, 2022

Climate impact of gas stoves in U.S. equal to half a million cars

New study could increase momentum to ban fossil fuels in new buildings.

Codes and Standards | Feb 7, 2022

Energy efficiency ratings not reflecting true energy use

Highest rated U.K. buildings are less efficient than lower rated ones.

Codes and Standards | Feb 3, 2022

Illinois tops USGBC list of states with the most LEED certified projects in 2021

Top 10 states plus D.C. certified more than 247 million gross square feet.

Codes and Standards | Feb 2, 2022

Public works contracting reform advances in New York State

Governor signs bill to form advisory council that will propose policy changes.

Codes and Standards | Feb 2, 2022

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.

Codes and Standards | Feb 1, 2022

Biden Administration launches state, local coalition to boost building performance standards

Will focus on energy efficiency and electrification across the buildings sector.

Codes and Standards | Jan 26, 2022

Downtown digital twin to aid Las Vegas in setting policy priorities

Will be used to address energy use, emissions, traffic, parking, noise, and emergency management.

Codes and Standards | Jan 25, 2022

Modeling tool helps compare options for HVAC systems when little known about a building

Compares projected costs and energy usage for all HVAC systems and hot water consumption.

Codes and Standards | Jan 25, 2022

Critics slam proposed revamp of California’s solar net energy metering rate

Could make rooftop solar panels unaffordable for most customers.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021