flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Deal on 2015 budget slashes most federal construction spending

Deal on 2015 budget slashes most federal construction spending

Amid cuts, GSA is a bright spot


By Peter Fabris, Contributing Editors | December 18, 2014
U.S. General Services Administration Building-E Street facade. Photo: General Se
U.S. General Services Administration Building-E Street facade. Photo: General Services Administration via Wikimedia Commons

The $1.1 trillion funding bill for fiscal year 2015 approved by Congress makes deep cuts in some construction programs, but the General Services Administration suffered just a short haircut by comparison.

The GSA, which owns and manages most non-military federal buildings, is on the books for a $255 million cut in 2015, but compared to 2014, the $1.3 billion for construction is still more than the funding received in 2011, 2012 and 2013 combined. The GSA’s construction and acquisition account remains steady in 2015 at over $500 million. The reduction in 2015 funding will come largely from the major repairs and alterations account.

Total funding for federal construction accounts tracked by the Associated General Contractors of America is over $106 billion for 2015. This represents a nearly $5 billion cut from 2014 levels.

Military construction accounts are in line for steep cuts. Overall, military construction funds will be cut by $3 billion (40%) in 2015 compared to 2014 levels.

(http://news.agc.org/2014/12/13/funding-bill-passes-house/)

Related Stories

| Jan 31, 2013

California Building Standards Commission adopts 2013 code update

The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.

| Jan 25, 2013

D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives

The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.

| Jan 25, 2013

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Plug loads illustrate how much end-users impact overall building energy use.

| Jan 25, 2013

ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2

A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.

| Jan 25, 2013

AISC 206-13 standard for structural steel erectors available for review

AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.

| Jan 25, 2013

Builders Hardware Manufacturers Assn. revises five ANSI hardware standards

The Builders Hardware Manufacturers Association (BHMA) has released five revisions to ANSI/BHMA standards recently been approved by ANSI (American National Standards Institute).

| Jan 16, 2013

Pentagon plans huge spending cuts, including construction funds, amid budget deadlock fears

Defense Secretary Leon Panetta has ordered cuts to military spending as a precaution in case the White House and Congress fail to agree to avert $52 billion in cuts to the Pentagon budget this year.

| Jan 16, 2013

GSA's Green Proving Ground program pushes energy efficiency

The General Services Administration, which manages a portfolio of almost 10,000 buildings, is using the Green Proving Ground program to test technological advances in energy efficiency.

| Jan 16, 2013

Standards that include reflective roofs must take into account local climate

Roofs painted white can reflect heat and reduce warm-weather energy use, but in cooler regions like Minneapolis or Chicago, the issue of energy-efficiency is less straightforward.

| Jan 16, 2013

New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code

NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021