In the aftermath of the 9/11 terrorist attacks, New York City enacted a requirement that all office buildings 100 feet tall or taller install sprinkler systems.
The deadline for meeting that code mandate is this July 1. Building owners must submit a final report on the sprinkler system by an engineer or architect by that date. The deadline is not for receiving approval from the city, says Daniel Colombini, principal and director of plumbing and fire protection engineering, Goldman Copeland.
“It’s important to allow time for the engineer or architect to inspect the building and for the building contractor, before that, to close out the building department application,” Colombini says. “It can take a month or more for the contractor to complete that process.”
Some spaces that were exempt under older codes, such as bathrooms and mechanical rooms, are now covered. “It’s essential to ensure that all such spaces are now sprinklered,” he adds. Extension requests are no longer being accepted by the city, and there is no process for appeal.
Related Stories
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.
Codes and Standards | Feb 14, 2017
Paper outlines how BREEAM credits can be used for WELL standard compliance
The paper provides guidance on how to streamline pursuit of dual certification.
Codes and Standards | Feb 14, 2017
Evidence mounts on health, productivity benefits of sustainable work spaces
High-performance green buildings are linked to better job performance.
