The Concrete Reinforcing Steel Institute (CRSI) has named a new chairman at its 88th Annual Conference in Washington, D.C.
Matthew L. Brace, Vice President Central Region – CMC Americas, Commercial Metals Company, was elected CRSI chairman on May 1. He joined Commercial Metals Company in 2000 as a Regional Sales Representative for the South Carolina mill. Since then, he has worked as the general manager of sales for both the South Carolina and Alabama mills, the vice president of sales for all of the Americas’ mills, in marketing for the Americas and in sales for the Rebar Fabrication division His current duties include Central Region P&L management for the fabrication, recycling, and mill operations.
In addition, Scott Stevens of Dimension Fabricators was elected to the board of directors. He will serve a two-year term. Stevens was also elected vice-chair.
The CRSI 2012 Board of Directors Officers and Executive Committee members include:
- Chairman Mathew Brace, CMC Americas, Seguin, Texas
- Vice-Chairman Scott Stevens, Dimension Fabricators, Scotia, N.Y.
- Secretary/Treasurer Michael Deis, Dayton Superior, Dayton, Ohio
- Past Chairman John P. Simmet, Simcote, St. Paul, Minn.
- James (Pete) L. Diggs, Gerdau, Nashville, Tenn.
- Robert J. Stone, Nucor Steel, Charlotte, N.C. +
Related Stories
| May 15, 2013
Schneider Electric announces Global Xperience Efficiency Events for 2013
Schneider Electric’s Xperience Efficiency series will begin with events in the United States, China, Colombia, Brazil and Russia.
| May 15, 2013
Center for Green Schools, Architecture for Humanity release new tool for green schools
The 70-page guide demystifies the processes of identifying building improvement opportunities and finance and implementation strategies.
| May 14, 2013
Paints and coatings: The latest trends in sustainability
When it comes to durability, a 50-year building design ideally should include 50-year coatings. Many building products consume substantial amounts of energy, water, and petrochemicals during manufacture, but they can make up for it in the operations phase. The same should be expected from architectural coatings.
| May 14, 2013
Advanced turbines generate 6X more energy than conventional models
US-based wind energy company SheerWind just unveiled the INVELOX – a tunnel-based wind turbine that can produce up to 600% more power than traditional wind turbines.
| May 14, 2013
Raymond Clark joins HOK’s Chicago Practice as Management Principal
HOK announced today that Raymond Clark, AIA, LEED AP, has joined its leadership team in Chicago as senior vice president and management principal.
| May 14, 2013
Easy net-zero energy buildings [infographic]
"Be a Zero Hero" infographic educates building industry professionals on ultra energy-efficient structural insulated panel construction
| May 9, 2013
10 high-efficiency plumbing fixtures
From a "no sweat" toilet to a deep-well lavatory, here's a round up of the latest high-efficiency plumbing fixtures.
| May 9, 2013
Post-tornado Greensburg, Kan., leads world in LEED-certified buildings per capita
Six years after a tornado virtually wiped out the town, Greensburg, Kan., is the world's leading community in LEED-certified buildings per capita.
| May 8, 2013
Preventable curtain wall failures - AIA/CES course
In many cases, curtain wall failures are caused by fairly simple errors that occur during the fabrication and installation process. This presentation will highlight common errors and when they typically occur.
| May 8, 2013
NBBJ appoints Tim Leberecht Chief Marketing Officer
NBBJ, a global architecture and design firm, today announced that it has appointed Tim Leberecht as its Chief Marketing Officer. Leberecht joins NBBJ from Frog Design where he led the marketing organization from 2006 to 2013 and helped transform the company into one of the world’s foremost design and innovation consultancies.
