A proposed revision of California’s solar net energy metering rate would be disastrous for the goal of advancing solar power, according to a utility rate design expert and economist.
As reported at PV magazine, the proposed decision by the California Public Utilities Commission would increase the payback period for rooftop solar to over 20 years, according to Dr. Ahmad Faruqui. Under current rules, the payback period is between seven and nine years. The expected lifespan of solar panels is 20 to 25 years, making a 20-year payback unattractive to most homeowners, critics charge.
The new proposal would mean that a customer with a moderate system size of 7 kW would pay an additional $56 per month for fixed charges alone. In addition, the plan would lower solar export payments by nearly 80%.
Proposal opponents are calling on Gov. Gavin Newsom to intervene.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
