To succeed in the coming decades, construction workers will need continuous skills upgrades, according to a report by the Autodesk Foundation and Monitor Institute by Deloitte.
The research outlines a comprehensive framework for examining the skills gap challenge and specific opportunity areas for investment. “We need to understand the effects of technology adoption, how to mitigate the risks, and how to ensure that long-term incentives for success are aligned for all parties,” according to a news release.
The report highlights four key points about how to address the skills gap in U.S. construction and manufacturing:
— Training workers for new technical skills is important, but these skills can quickly become obsolete if they are not explicitly tied to more foundational and transferable capabilities
— The accelerating pace of technological change necessitates workers engage in continuous “skills upgrades,” requiring workers to imagine – and navigate – very different career pathways
— Continuous learning requires shortening the metaphorical distance between learning and work, which is most effective when learning is embedded into work and work into learning
— Closing the skills gap requires addressing a broader set of challenges facing workers: in the marketplace for jobs, at work, and in policies and practices that affect the broader “social determinants of work”
Related Stories
| May 3, 2012
Innovative wastewater treatment helps achieve LEED rating
LEED for New Construction, Neighborhood Development and the LEED Volume Program offer some ways to achieve LEED points when dealing with wastewater treatment.
| Apr 26, 2012
Lack of bolts on steel support caused collapse at Cincinnati casino
Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.
| Apr 26, 2012
OSHA criticized for taking too long to roll out safety rules
The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.
| Apr 26, 2012
Contractors fear that GSA scandal will lead to fewer federal construction contracts
In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.
| Apr 26, 2012
Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales
Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.
| Apr 26, 2012
New York City Council moves to license elevator mechanics
New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.
| Apr 23, 2012
AAMA releases updated specification for anodized aluminum
AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.
| Apr 19, 2012
Michigan legislature tackling controversial rules on electricians
A fight is brewing in the Michigan legislature over how many fully qualified electricians must be present during electrical work when apprentices also are on hand.
