The improved economy has boosted construction starts, but a shortage of experienced trade workers has led to more on-the-job injuries and construction defects, says Doug Cauti, senior vice president and chief underwriting officer of Liberty Mutual’s construction practice.
The increase in injuries stems from mistakes such as falls from heights due to forgetting to tie off and tripping over items that could have been easily moved—things that experienced workers tend to avoid, Cauti says.
The first six months of employment are the most risky for new tradespeople.
Experienced workers who return to the job after a long layoff may need refresher courses in safety protocols, Cauti points out. Some may be more injury prone if they were physically inactive while they were out of work.
Insurance executives are also seeing an uptick in construction-defect claims, particularly in the apartment and condo markets which have been hot in some regions recently.
There is good news, though, for contractors—at least this year. Insurance rates are expected to hold steady or rise modestly for the remainder of the year for most construction clients.
(http://www.propertycasualty360.com/2014/05/07/building-on-a-rebound?t=es-specialty)
Related Stories
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
| Jan 16, 2013
ANSI passes new safety standards for reinforcing steel and post-tensioning
The ANSI A10 Accredited Standards Committee for Construction and Demolition Operations recently approved amendments to the ANSI A10.9 Concrete and Masonry Standard.
| Jan 8, 2013
Congress passes Drywall Safety Act
Congress recently passed the Drywall Safety Act; President Barack Obama is expected to sign it soon.
| Jan 8, 2013
Building-integrated PVs could help boost green standards over the next few years
A developing technology could begin to have an impact on sustainable standards over the next few years.
| Jan 8, 2013
Revamp of codes among nine low tech steps to raise community resiliency
Updating of local zoning and building codes is one of nine low-tech steps that can boost sustainability and storm resiliency, according to this article.
| Jan 8, 2013
Group releases safety and building codes from 24 countries
Public.Resource.Org released 10,062 public safety documents including building codes covering 24 countries and 6 regions.
| Jan 8, 2013
Montana developing high-performance building standards for state projects
The Montana Department of Administration is developing a single building standard for all state facilities, and hopes to have a plan in place this spring.
| Jan 4, 2013
AGC economist says "fiscal cliff" deal will give construction a boost
The deal in Congress to avoid going over the so-called fiscal cliff "should encourage many businesses to go ahead with projects they have held in reserve," said Ken Simonson, chief economist of the Associated General Contractors of America.
| Jan 4, 2013
California standards on furnishings, insulation to be revised
California is revising the state’s standards on interior furniture and insulation to maintain or improve fire safety while reducing or eliminating the use of toxic chemicals.
| Jan 4, 2013
Tilt-Up Concrete Association releases new temporary wind bracing guidelines
The Tilt-Up Concrete Association has released revised guidelines on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction.
