flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Construction material prices drop slightly in April, extending the decline

Construction material prices drop slightly in April, extending the decline


By Jim Haughey, BD+C Economist and Chief Economist with Reed Construction Data | August 11, 2010
This article first appeared in the 200906 issue of BD+C.

The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.

The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.

April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.

Percent Change in ..... 1 month 3 months 12 months 3 years
Source: Producer Price Index. Bureau of Labor Statistics
Construction commodities
Cement 0.8 -0.2 0.0 6.1
Construction sand, gravel & crushed stone 0.5 1.4 5.5 23.1
Softwood plywood -3.3 -4.9 -12.7 -21.1
Softwood lumber 1.6 -2.6 -10.7 -32.5
Manufactured materials
Gypsum products -0.2 -1.2 5.3 -17.5
Diesel fuel 20.5 -2.6 -56.2 -30.6
Paint 0.1 0.1 12.4 22.5
Plastic construction products -0.5 -0.6 3.0 1.9
Vitreous plumbing fixtures 2.3 2.4 4.2 -1.9
Ceramic tile -2.0 -1.4 -0.2 1.6
Flat glass -0.4 -1.0 2.9 2.7
Hot-rolled bars, plates, and structural shapes -7.3 -15.7 -25.9 -2.0
Extruded aluminum rod, bar, and other shapes 1.2 -4.3 -26.3 -18.2
Architectural metalwork 0.6 -2.4 12.1 24.7
Metal plumbing fixtures 0.5 0.2 2.2 13.1
Builders' hardware 0.5 -2.7 6.8 20.4
Sheet metal products -0.6 -3.6 0.2 9.9
Nonferrous pipe and tube 20.9 26.7 -28.5 -1.3
Building brick 0.5 -0.2 0.1 0.8
Ready-mix concrete -1.0 -1.9 3.4 10.7
Concrete block and brick 0.3 -0.1 3.3 10.1
Millwork (window, door, cabinet) -0.2 0.7 1.7 5.3
Engineered wood products -1.3 -3.3 -2.6 -14.6
Metal doors, sash, and trim -0.8 0.2 5.4 9.2
Summary
Construction materials (commodity level) -2.3 -3.1 -1.7 4.9
Inputs to construction industries -0.4 -1.6 -3.6 6.4
Inputs to nonresidential construction -0.3 -1.6 -5.2 6.3

Related Stories

| Jun 8, 2012

Living Building Challenge wins the 2012 Buckminster Fuller Challenge

The Living Building Challenge was chosen from a pool of 122 of entries from around the world.

| Jun 8, 2012

Allsteel names Kris Yates to head architectural products group

Yates is responsible for the start up, launch and ongoing sales and marketing of Allsteel’s new Beyond movable walls.

| Jun 7, 2012

WDMA and FMA to affiliate and integrate operations

Over the coming months both organizations will begin the process of formalizing the details of the agreement for final approval by both organizations, with the formal change expected to take effect in January 2015.

| Jun 4, 2012

Brownfield goes green

Chicago Center for Green Technology uses high-speed, energy-efficient hand dryers to share its green message and earn LEED credits.

| Jun 1, 2012

New BD+C University Course on Insulated Metal Panels available

By completing this course, you earn 1.0 HSW/SD AIA Learning Units.

| Jun 1, 2012

AIA 2030 Commitment Program reports new results

The full report contains participating firm demographics, energy reduction initiatives undertaken by firms, anecdotal accounts, and lessons learned.

| May 31, 2012

3 Metal Roofing Case Studies Illustrate Benefits

Metal roofing systems offer values such as longevity, favorable life cycle costs, and heightened aesthetic appeal.

| May 30, 2012

Boral Bricks announces winners of “Live.Work.Learn” student architecture contest

Eun Grace Ko, a student at the Ryerson University in Toronto, Canada, named winner of annual contest.

boombox1
boombox2
native1

More In Category

Products and Materials

Top products from AIA 2024

This month, Building Design+Construction editors are bringing you the top products displayed at the 2024 AIA Conference on Architecture & Design. Nearly 550 building product manufacturers showcased their products—here are 17 that caught our eye.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021