Forty states added construction jobs between November 2016 and November 2017, while 39 states added construction jobs between October and November, according to an analysis by the Associated General Contractors of America of Labor Department data released today. Association officials noted that firms in most states are adding jobs amid expectations that demand will continue to grow thanks to new tax cuts and regulatory reforms.
"There were robust construction gains in most parts of the country as the economy continues to expand," said Stephen E. Sandherr, Chief Executive Officer for the association. "Demand should continue to grow as newly enacted tax cuts and regulatory reforms stimulate even more widespread economic growth."
California added the most construction jobs (48,400 jobs, 6.2%) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Florida (41,800 jobs, 8.7%); Texas (23,900 jobs, 3.4 percent); New York (12,600 jobs, 3.4 percent) and Pennsylvania (12,000 jobs, 4.6 percent). Nevada (13.8 percent, 10,900 jobs) added the highest percentage of new construction jobs during the past year, followed by Rhode Island (13 percent, 2,400 jobs); New Hampshire (10 percent, 2,600 jobs); Oregon (9.7 percent, 9,100 jobs) and Florida.
Ten states shed construction jobs between November 2016 and November 2017 while construction employment was unchanged in the District of Columbia. Missouri lost the highest number of construction jobs (-6,500 jobs, -5.3%), followed by Iowa (-6,100 jobs, -7.5%); North Carolina (-3,100 jobs, -1.5%) and North Dakota (-1,600 jobs, -4.8%). Iowa lost the highest percentage for the year, followed by Missouri; North Dakota; Montana (-3.5%, 1,000 jobs) and South Dakota (-1.7%, -400 jobs).
Among the 39 states that added construction jobs between October and November, Texas added more than any other state (8,200 jobs, 1.1%), followed by Florida (6,200 jobs, 1.2%); New York (5,300 jobs, 1.4%); Indiana (4,900 jobs, 3.6%) and Pennsylvania (3,400 jobs, 1.4%). Alaska added the highest percentage of construction jobs for the month (4.5%, 700 jobs), followed by Indiana; Nebraska (2.6%, 1,300 jobs); Rhode Island (2.5%, 500 jobs) and West Virginia (2.5%, 800 jobs).
Eleven states lost construction jobs between October and November, while construction employment was unchanged in D.C. Maryland lost the most construction jobs for the month (-1,900 jobs, -1.1%), followed by Oklahoma (-1,400 jobs, -1.7%) and Connecticut (-1,300 jobs, -2.2%). Vermont (-3.2%, -500 jobs) lost the highest percentage of construction jobs, followed by Wyoming (-2.9%, -600 jobs) and Montana (-2.2%, -600 jobs).
Association officials noted that many construction firms have high expectations for the coming year. They said that as they prepare an annual construction industry outlook the association and Sage Construction and Real Estate will release on January 3rd, it is clear many firms expect the administration's efforts to reduce needless regulatory burdens and newly enacted tax cuts will further improve market conditions.
"This is one of the best business climates many firms have experienced in over a decade," Sandherr said. "While Washington needs to address infrastructure funding, workforce shortages and multi-employer retirement reforms, 2018 looks to be a strong year for the industry."
View the state employment data by rank and state. View the state employment map.
Related Stories
| Nov 3, 2010
Virginia biofuel research center moving along
The Sustainable Energy Technology Center has broken ground in October on the Danville, Va., campus of the Institute for Advanced Learning and Research. The 25,000-sf facility will be used to develop enhanced bio-based fuels, and will house research laboratories, support labs, graduate student research space, and faculty offices. Rainwater harvesting, a vegetated roof, low-VOC and recycled materials, photovoltaic panels, high-efficiency plumbing fixtures and water-saving systems, and LED light fixtures will be deployed. Dewberry served as lead architect, with Lord Aeck & Sargent serving as laboratory designer and sustainability consultant. Perigon Engineering consulted on high-bay process labs. New Atlantic Contracting is building the facility.
| Nov 3, 2010
Dining center cooks up LEED Platinum rating
Students at Bowling Green State University in Ohio will be eating in a new LEED Platinum multiuse dining center next fall. The 30,000-sf McDonald Dining Center will have a 700-seat main dining room, a quick-service restaurant, retail space, and multiple areas for students to gather inside and out, including a fire pit and several patios—one of them on the rooftop.
| Nov 2, 2010
11 Tips for Breathing New Life into Old Office Spaces
A slowdown in new construction has firms focusing on office reconstruction and interior renovations. Three experts from Hixson Architecture Engineering Interiors offer 11 tips for office renovation success. Tip #1: Check the landscaping.
| Nov 2, 2010
Cypress Siding Helps Nature Center Look its Part
The Trinity River Audubon Center, which sits within a 6,000-acre forest just outside Dallas, utilizes sustainable materials that help the $12.5 million nature center fit its wooded setting and put it on a path to earning LEED Gold.
| Nov 2, 2010
A Look Back at the Navy’s First LEED Gold
Building Design+Construction takes a retrospective tour of a pace-setting LEED project.
| Nov 2, 2010
Wind Power, Windy City-style
Building-integrated wind turbines lend a futuristic look to a parking structure in Chicago’s trendy River North neighborhood. Only time will tell how much power the wind devices will generate.
| Nov 2, 2010
Energy Analysis No Longer a Luxury
Back in the halcyon days of 2006, energy analysis of building design and performance was a luxury. Sure, many forward-thinking AEC firms ran their designs through services such as Autodesk’s Green Building Studio and IES’s Virtual Environment, and some facility managers used Honeywell’s Energy Manager and other monitoring software. Today, however, knowing exactly how much energy your building will produce and use is survival of the fittest as energy costs and green design requirements demand precision.
| Nov 2, 2010
Yudelson: ‘If It Doesn’t Perform, It Can’t Be Green’
Jerry Yudelson, prolific author and veteran green building expert, challenges Building Teams to think big when it comes to controlling energy use and reducing carbon emissions in buildings.
| Nov 2, 2010
Historic changes to commercial building energy codes drive energy efficiency, emissions reductions
Revisions to the commercial section of the 2012 International Energy Conservation Code (IECC) represent the largest single-step efficiency increase in the history of the national, model energy. The changes mean that new and renovated buildings constructed in jurisdictions that follow the 2012 IECC will use 30% less energy than those built to current standards.
| Nov 1, 2010
Sustainable, mixed-income housing to revitalize community
The $41 million Arlington Grove mixed-use development in St. Louis is viewed as a major step in revitalizing the community. Developed by McCormack Baron Salazar with KAI Design & Build (architect, MEP, GC), the project will add 112 new and renovated mixed-income rental units (market rate, low-income, and public housing) totaling 162,000 sf, plus 5,000 sf of commercial/retail space.
