Forty states added construction jobs between November 2016 and November 2017, while 39 states added construction jobs between October and November, according to an analysis by the Associated General Contractors of America of Labor Department data released today. Association officials noted that firms in most states are adding jobs amid expectations that demand will continue to grow thanks to new tax cuts and regulatory reforms.
"There were robust construction gains in most parts of the country as the economy continues to expand," said Stephen E. Sandherr, Chief Executive Officer for the association. "Demand should continue to grow as newly enacted tax cuts and regulatory reforms stimulate even more widespread economic growth."
California added the most construction jobs (48,400 jobs, 6.2%) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Florida (41,800 jobs, 8.7%); Texas (23,900 jobs, 3.4 percent); New York (12,600 jobs, 3.4 percent) and Pennsylvania (12,000 jobs, 4.6 percent). Nevada (13.8 percent, 10,900 jobs) added the highest percentage of new construction jobs during the past year, followed by Rhode Island (13 percent, 2,400 jobs); New Hampshire (10 percent, 2,600 jobs); Oregon (9.7 percent, 9,100 jobs) and Florida.
Ten states shed construction jobs between November 2016 and November 2017 while construction employment was unchanged in the District of Columbia. Missouri lost the highest number of construction jobs (-6,500 jobs, -5.3%), followed by Iowa (-6,100 jobs, -7.5%); North Carolina (-3,100 jobs, -1.5%) and North Dakota (-1,600 jobs, -4.8%). Iowa lost the highest percentage for the year, followed by Missouri; North Dakota; Montana (-3.5%, 1,000 jobs) and South Dakota (-1.7%, -400 jobs).
Among the 39 states that added construction jobs between October and November, Texas added more than any other state (8,200 jobs, 1.1%), followed by Florida (6,200 jobs, 1.2%); New York (5,300 jobs, 1.4%); Indiana (4,900 jobs, 3.6%) and Pennsylvania (3,400 jobs, 1.4%). Alaska added the highest percentage of construction jobs for the month (4.5%, 700 jobs), followed by Indiana; Nebraska (2.6%, 1,300 jobs); Rhode Island (2.5%, 500 jobs) and West Virginia (2.5%, 800 jobs).
Eleven states lost construction jobs between October and November, while construction employment was unchanged in D.C. Maryland lost the most construction jobs for the month (-1,900 jobs, -1.1%), followed by Oklahoma (-1,400 jobs, -1.7%) and Connecticut (-1,300 jobs, -2.2%). Vermont (-3.2%, -500 jobs) lost the highest percentage of construction jobs, followed by Wyoming (-2.9%, -600 jobs) and Montana (-2.2%, -600 jobs).
Association officials noted that many construction firms have high expectations for the coming year. They said that as they prepare an annual construction industry outlook the association and Sage Construction and Real Estate will release on January 3rd, it is clear many firms expect the administration's efforts to reduce needless regulatory burdens and newly enacted tax cuts will further improve market conditions.
"This is one of the best business climates many firms have experienced in over a decade," Sandherr said. "While Washington needs to address infrastructure funding, workforce shortages and multi-employer retirement reforms, 2018 looks to be a strong year for the industry."
View the state employment data by rank and state. View the state employment map.
Related Stories
| Nov 11, 2010
Saint-Gobain to make $80 million investment in SAGE Electrochromics
Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.
| Nov 11, 2010
USGBC certifies more than 1 billion square feet of commercial space
This month, the total footprint of commercial projects certified under the U.S. Green Building Council’s LEED Green Building Rating System surpassed one billion square feet. Another six billion square feet of projects are registered and currently working toward LEED certification around the world. Since 2000, more than 36,000 commercial projects and 38,000 single-family homes have participated in LEED.
| Nov 10, 2010
$700 million plan to restore the National Mall
The National Mall—known as America’s front yard—is being targeted for a massive rehab and restoration that could cost as much as $700 million (it’s estimated that the Mall has $400 million in deferred maintenance alone). A few of the proposed projects: refurbishing the Grant Memorial, replacing the Capitol Reflecting Pool with a smaller pool or fountain, reconstructing the Constitution Gardens lake and constructing a multipurpose visitor center, and replacing the Sylvan Theater near the Washington Monument with a new multipurpose facility.
| Nov 9, 2010
Just how green is that college campus?
The College Sustainability Report Card 2011 evaluated colleges and universities in the U.S. and Canada with the 300 largest endowments—plus 22 others that asked to be included in the GreenReportCard.org study—on nine categories, including climate change, energy use, green building, and investment priorities. More than half (56%) earned a B or better, but 6% got a D. Can you guess which is the greenest of these: UC San Diego, Dickinson College, University of Calgary, and Dartmouth? Hint: The Red Devil has turned green.
| Nov 9, 2010
12 incredible objects being made with 3D printers today
BD+C has reported on how 3D printers are attracting the attention of AEC firms. Now you can see how other creative types are utilizing this fascinating printing technology. Among the printed items: King Tut’s remains, designer shoes, and the world’s smallest Rubik’s Cube.
| Nov 9, 2010
U.S. Army steps up requirements for greening building
Cool roofs, solar water heating, and advanced metering are among energy-efficiency elements that will have to be used in new permanent Army buildings in the U.S. and abroad starting in FY 2013. Designs for new construction and major renovations will incorporate sustainable design and development principles contained in ASHRAE 189.1.
| Nov 9, 2010
Designing a library? Don’t focus on books
How do you design a library when print books are no longer its core business? Turn them into massive study halls. That’s what designers did at the University of Amsterdam, where they transformed the existing 27,000-sf library into a study center—without any visible books. About 2,000 students visit the facility daily and encounter workspaces instead of stacks.
| Nov 9, 2010
Turner Construction report: Green buildings still on the agenda
Green buildings continue to be on the agenda for real estate owners, developers, and corporate owner-occupants, according to the Turner 2010 Green Building Market Barometer. Key findings: Almost 90% of respondents said it was extremely or very likely they would incorporate energy-efficiency improvements in their new construction or renovation project, and 60% expected to incorporate improvements to water efficiency, indoor environmental quality, and green materials.
| Nov 5, 2010
New Millennium’s Gary Heasley on BIM, LEED, and the nonresidential market
Gary Heasley, president of New Millennium Building Systems, Fort Wayne, Ind., and EVP of its parent company, Steel Dynamics, Inc., tells BD+C’s Robert Cassidy about the Steel Joist Manufacturer’s westward expansion, its push to create BIM tools for its products, LEED, and the outlook for the nonresidential construction market.
| Nov 3, 2010
First of three green labs opens at Iowa State University
Designed by ZGF Architects, in association with OPN Architects, the Biorenewable Research Laboratory on the Ames campus of Iowa State University is the first of three projects completed as part of the school’s Biorenewables Complex. The 71,800-sf LEED Gold project is one of three wings that will make up the 210,000-sf complex.
