Associated Builders and Contractors (ABC) released the following statement on the “Waters of the U.S.” (WOTUS) final rule issued today by the U.S. Environmental Protection Agency (EPA) and the U.S. Army Corps of Engineers (Corps).
“ABC remains concerned that the Waters of the U.S. rule issued today will lead to an unnecessarily longer and more expensive permitting process for contractors which would undoubtedly harm the construction industry,” said ABC Vice President of Government Affairs Geoff Burr. “Throughout the rulemaking process the business community as a whole, state and local officials, as well as a bipartisan group of congressional lawmakers have opposed the considerable expansion of federal jurisdiction granted under the overreaching proposed rule.
“Increased regulatory compliance costs and a more drawn out approval process will harm the construction industry directly and indirectly as our industry’s growth relies largely on a growing economy as a whole,” said Burr. “We are still reviewing the regulations released with this rule today, but remain concerned that this poorly constituted proposal will have a negative impact on any current or proposed construction project that is near a jurisdictional ‘water’ as defined under the now broadened authority of the EPA or Corps.”
The proposed rule would dramatically expand the scope of federal authority over water and land uses across the country and has met heavy opposition from a wide range of industries within the business community, abipartisan group of U.S. Senators, bipartisan group of members of the House of Representatives and the U.S. Small Business Administration’s Office of Advocacy.
ABC has been a vocal opponent of WOTUS since it was proposed in April 2014 and has:
- Filed comments along with more than 50 ABC chapters to voice deep concern over the rule
- Filed comments with a group of 375 trade associations to oppose the rule
- Filed comments as a member of the Waters Advocacy Coalition (WAC) to oppose the rule
To read ABC’s comments click here, to read the group of associations comments click here, to read the WAC comments click here.
Related Stories
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
| Jan 31, 2013
More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert
The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.
