The construction workforce was smaller in every state and the District of Columbia in January 2010 than it was just 12 months earlier, according to a new analysis of federal data released today by the Associated General Contractors of America. The data indicated just how widespread the construction downturn is, association officials said, noting that 38 states and D.C. experienced a double digit percentage drop in construction employment.
"Construction employment is dropping everywhere and plummeting almost everywhere," said Ken Simonson, the association's chief economist. "Looking at this data, it is quite clear that the construction industry has yet to hit bottom."
Simonson noted that California lost more construction jobs, 128,700, while North Dakota lost the least jobs, 200, over the past twelve months. The five states with the largest percentage decline in employment were Nevada (29.9 percent); Arizona (26 percent); Colorado (22.2 percent); Idaho (21 percent); and Florida (20.4 percent). Meanwhile, North Dakota (1 percent); Nebraska (4.1 percent); Alaska (4.2 percent); South Dakota (5.9 percent); and Arkansas (6.2 percent) experienced the smallest decline in construction employment.
Even the monthly employment changes reflect the tough construction conditions, said Simonson, noting that 31 states lost construction jobs between December and January. He added that most of the states adding jobs for the month lost jobs in December, often more than they gained back in January. The economist said this suggested the monthly data was affected by unseasonable weather conditions that also are likely to affect February's state employment figures.
Association officials cited the new state employment data in urging the Senate to pass a ten month extension to the nation's surface transportation program and for the administration to accelerate stimulus-funded construction projects. "As privately-funded construction activity continues to decline, federal investments in infrastructure are often the difference between a job and unemployment for what's left of the industry."
View the state-by-state employment data.
Related Stories
Market Data | May 1, 2023
AEC firm proposal activity rebounds in the first quarter of 2023: PSMJ report
Proposal activity for architecture, engineering and construction (A/E/C) firms increased significantly in the 1st Quarter of 2023, according to PSMJ’s Quarterly Market Forecast (QMF) survey. The predictive measure of the industry’s health rebounded to a net plus/minus index (NPMI) of 32.8 in the first three months of the year.
Sustainability | May 1, 2023
Increased focus on sustainability is good for business and attracting employees
A recent study, 2023 State of Design & Make by software developer Autodesk, contains some interesting takeaways for the design and construction industry. Respondents to a survey of industry leaders from the architecture, engineering, construction, product design, manufacturing, and entertainment spheres strongly support the idea that improving their organization’s sustainability practices is good for business.
Codes and Standards | May 1, 2023
Hurricane Ian aftermath expected to prompt building code reform in Florida
Hurricane Ian struck the Southwest Florida coastline last fall with winds exceeding 150 mph, flooding cities, and devastating structures across the state. A construction risk management expert believes the projected economic damage, as high as $75 billion, will prompt the state to beef up building codes and reform land use rules.
| Apr 28, 2023
$1 billion mixed-use multifamily development will add 1,200 units to South Florida market
A giant $1 billion residential project, The District in Davie, will bring 1.6 million sf of new Class A residential apartments to the hot South Florida market. Located near Ft. Lauderdale and greater Miami, the development will include 36,000 sf of restaurants and retail space. The development will also provide 1.1 million sf of access controlled onsite parking with 2,650 parking spaces.
Architects | Apr 27, 2023
Blind Ambition: Insights from a blind architect on universal design
Blind architect Chris Downey shares his message to designers that universal design goes much further than simply meeting a code to make everything accessible.
Design Innovation Report | Apr 27, 2023
BD+C's 2023 Design Innovation Report
Building Design+Construction’s Design Innovation Report presents projects, spaces, and initiatives—and the AEC professionals behind them—that push the boundaries of building design. This year, we feature four novel projects and one building science innovation.
Mixed-Use | Apr 27, 2023
New Jersey turns a brownfield site into Steel Tech, a 3.3-acre mixed-use development
In Jersey City, N.J., a 3.3-acre redevelopment project called Steel Tech will turn a brownfield site into a mixed-use residential high-rise building, a community center, two public plazas, and a business incubator facility. Steel Tech received site plan approval in recent weeks.
Multifamily Housing | Apr 27, 2023
Watch: Specifying materials in multifamily housing projects
A trio of multifamily housing experts discusses trends in materials in their latest developments. Topics include the need to balance aesthetics and durability, the advantages of textured materials, and the benefits of biophilia.
AEC Tech Innovation | Apr 27, 2023
Does your firm use ChatGPT?
Is your firm having success utilizing ChatGPT (or other AI chat tools) on your building projects or as part of your business operations? If so, we want to hear from you.
Concrete Technology | Apr 24, 2023
A housing complex outside Paris is touted as the world’s first fully recycled concrete building
Outside Paris, Holcim, a Swiss-based provider of innovative and sustainable building solutions, and Seqens, a social housing provider in France, are partnering to build Recygénie—a 220-unit housing complex, including 70 social housing units. Holcim is calling the project the world’s first fully recycled concrete building.
