The construction workforce was smaller in every state and the District of Columbia in January 2010 than it was just 12 months earlier, according to a new analysis of federal data released today by the Associated General Contractors of America. The data indicated just how widespread the construction downturn is, association officials said, noting that 38 states and D.C. experienced a double digit percentage drop in construction employment.
"Construction employment is dropping everywhere and plummeting almost everywhere," said Ken Simonson, the association's chief economist. "Looking at this data, it is quite clear that the construction industry has yet to hit bottom."
Simonson noted that California lost more construction jobs, 128,700, while North Dakota lost the least jobs, 200, over the past twelve months. The five states with the largest percentage decline in employment were Nevada (29.9 percent); Arizona (26 percent); Colorado (22.2 percent); Idaho (21 percent); and Florida (20.4 percent). Meanwhile, North Dakota (1 percent); Nebraska (4.1 percent); Alaska (4.2 percent); South Dakota (5.9 percent); and Arkansas (6.2 percent) experienced the smallest decline in construction employment.
Even the monthly employment changes reflect the tough construction conditions, said Simonson, noting that 31 states lost construction jobs between December and January. He added that most of the states adding jobs for the month lost jobs in December, often more than they gained back in January. The economist said this suggested the monthly data was affected by unseasonable weather conditions that also are likely to affect February's state employment figures.
Association officials cited the new state employment data in urging the Senate to pass a ten month extension to the nation's surface transportation program and for the administration to accelerate stimulus-funded construction projects. "As privately-funded construction activity continues to decline, federal investments in infrastructure are often the difference between a job and unemployment for what's left of the industry."
View the state-by-state employment data.
Related Stories
| Nov 3, 2010
Virginia biofuel research center moving along
The Sustainable Energy Technology Center has broken ground in October on the Danville, Va., campus of the Institute for Advanced Learning and Research. The 25,000-sf facility will be used to develop enhanced bio-based fuels, and will house research laboratories, support labs, graduate student research space, and faculty offices. Rainwater harvesting, a vegetated roof, low-VOC and recycled materials, photovoltaic panels, high-efficiency plumbing fixtures and water-saving systems, and LED light fixtures will be deployed. Dewberry served as lead architect, with Lord Aeck & Sargent serving as laboratory designer and sustainability consultant. Perigon Engineering consulted on high-bay process labs. New Atlantic Contracting is building the facility.
| Nov 3, 2010
Dining center cooks up LEED Platinum rating
Students at Bowling Green State University in Ohio will be eating in a new LEED Platinum multiuse dining center next fall. The 30,000-sf McDonald Dining Center will have a 700-seat main dining room, a quick-service restaurant, retail space, and multiple areas for students to gather inside and out, including a fire pit and several patios—one of them on the rooftop.
| Nov 2, 2010
11 Tips for Breathing New Life into Old Office Spaces
A slowdown in new construction has firms focusing on office reconstruction and interior renovations. Three experts from Hixson Architecture Engineering Interiors offer 11 tips for office renovation success. Tip #1: Check the landscaping.
| Nov 2, 2010
Cypress Siding Helps Nature Center Look its Part
The Trinity River Audubon Center, which sits within a 6,000-acre forest just outside Dallas, utilizes sustainable materials that help the $12.5 million nature center fit its wooded setting and put it on a path to earning LEED Gold.
| Nov 2, 2010
A Look Back at the Navy’s First LEED Gold
Building Design+Construction takes a retrospective tour of a pace-setting LEED project.
| Nov 2, 2010
Wind Power, Windy City-style
Building-integrated wind turbines lend a futuristic look to a parking structure in Chicago’s trendy River North neighborhood. Only time will tell how much power the wind devices will generate.
| Nov 2, 2010
Energy Analysis No Longer a Luxury
Back in the halcyon days of 2006, energy analysis of building design and performance was a luxury. Sure, many forward-thinking AEC firms ran their designs through services such as Autodesk’s Green Building Studio and IES’s Virtual Environment, and some facility managers used Honeywell’s Energy Manager and other monitoring software. Today, however, knowing exactly how much energy your building will produce and use is survival of the fittest as energy costs and green design requirements demand precision.
| Nov 2, 2010
Yudelson: ‘If It Doesn’t Perform, It Can’t Be Green’
Jerry Yudelson, prolific author and veteran green building expert, challenges Building Teams to think big when it comes to controlling energy use and reducing carbon emissions in buildings.
| Nov 2, 2010
Historic changes to commercial building energy codes drive energy efficiency, emissions reductions
Revisions to the commercial section of the 2012 International Energy Conservation Code (IECC) represent the largest single-step efficiency increase in the history of the national, model energy. The changes mean that new and renovated buildings constructed in jurisdictions that follow the 2012 IECC will use 30% less energy than those built to current standards.
| Nov 1, 2010
Sustainable, mixed-income housing to revitalize community
The $41 million Arlington Grove mixed-use development in St. Louis is viewed as a major step in revitalizing the community. Developed by McCormack Baron Salazar with KAI Design & Build (architect, MEP, GC), the project will add 112 new and renovated mixed-income rental units (market rate, low-income, and public housing) totaling 162,000 sf, plus 5,000 sf of commercial/retail space.
