The construction workforce was smaller in every state and the District of Columbia in January 2010 than it was just 12 months earlier, according to a new analysis of federal data released today by the Associated General Contractors of America. The data indicated just how widespread the construction downturn is, association officials said, noting that 38 states and D.C. experienced a double digit percentage drop in construction employment.
"Construction employment is dropping everywhere and plummeting almost everywhere," said Ken Simonson, the association's chief economist. "Looking at this data, it is quite clear that the construction industry has yet to hit bottom."
Simonson noted that California lost more construction jobs, 128,700, while North Dakota lost the least jobs, 200, over the past twelve months. The five states with the largest percentage decline in employment were Nevada (29.9 percent); Arizona (26 percent); Colorado (22.2 percent); Idaho (21 percent); and Florida (20.4 percent). Meanwhile, North Dakota (1 percent); Nebraska (4.1 percent); Alaska (4.2 percent); South Dakota (5.9 percent); and Arkansas (6.2 percent) experienced the smallest decline in construction employment.
Even the monthly employment changes reflect the tough construction conditions, said Simonson, noting that 31 states lost construction jobs between December and January. He added that most of the states adding jobs for the month lost jobs in December, often more than they gained back in January. The economist said this suggested the monthly data was affected by unseasonable weather conditions that also are likely to affect February's state employment figures.
Association officials cited the new state employment data in urging the Senate to pass a ten month extension to the nation's surface transportation program and for the administration to accelerate stimulus-funded construction projects. "As privately-funded construction activity continues to decline, federal investments in infrastructure are often the difference between a job and unemployment for what's left of the industry."
View the state-by-state employment data.
Related Stories
Sponsored | Steel Buildings | Jan 25, 2022
Multifamily + Hospitality: Benefits of building in long-span composite floor systems
Long-span composite floor systems provide unique advantages in the construction of multi-family and hospitality facilities. This introductory course explains what composite deck is, how it works, what typical composite deck profiles look like and provides guidelines for using composite floor systems. This is a nano unit course.
Sponsored | Reconstruction & Renovation | Jan 25, 2022
Concrete buildings: Effective solutions for restorations and major repairs
Architectural concrete as we know it today was invented in the 19th century. It reached new heights in the U.S. after World War II when mid-century modernism was in vogue, following in the footsteps of a European aesthetic that expressed structure and permanent surfaces through this exposed material. Concrete was treated as a monolithic miracle, waterproof and structurally and visually versatile.
Urban Planning | Jan 25, 2022
Retooling innovation districts for medium-sized cities
This type of development isn’t just about innovation or lab space; and it’s not just universities or research institutions that are driving this change.
Sponsored | Resiliency | Jan 24, 2022
Norshield Products Fortify Critical NYC Infrastructure
New York City has two very large buildings dedicated to answering the 911 calls of its five boroughs. With more than 11 million emergency calls annually, it makes perfect sense. The second of these buildings, the Public Safety Answering Center II (PSAC II) is located on a nine-acre parcel of land in the Bronx. It’s an imposing 450,000 square-foot structure—a 240-foot-wide by 240-foot-tall cube. The gleaming aluminum cube risesthe equivalent of 24 stories from behind a grassy berm, projecting the unlikely impression that it might actually be floating. Like most visually striking structures, the building has drawn as much scorn as it has admiration.
Sponsored | Resiliency | Jan 24, 2022
Blast Hazard Mitigation: Building Openings for Greater Safety and Security
Coronavirus | Jan 20, 2022
Advances and challenges in improving indoor air quality in commercial buildings
Michael Dreidger, CEO of IAQ tech startup Airsset speaks with BD+C's John Caulfield about how building owners and property managers can improve their buildings' air quality.
Architects | Jan 17, 2022
OSPORTS adds Robert Hayes to lead operational and business development efforts
Hayes will guide the OSPORTS organization in its mission to offer a unique perspective to designing world-class facilities.
Architects | Jan 13, 2022
Hollywood is now the Stream Factory
Insatiable demand for original content, and its availability on a growing number of streaming platforms, have created shortages — and opportunities — for new sound stages.
Architects | Jan 13, 2022
Robert Eisenstat and Paul Mankins receive 2022 AIA Award for Excellence in Public Architecture
The award recognizes architects, public officials, or other individuals who design distinguished public facilities and advocate for design excellence.
3D Printing | Jan 12, 2022
Using 3D-printed molds to create unitized window forms
COOKFOX designer Pam Campbell and Gate Precast's Mo Wright discuss the use of 3D-printed molds from Oak Ridge National Lab to create unitized window panels for One South First, a residential-commercial high-rise in Brooklyn, N.Y.