flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Construction employers add 36,000 jobs in January and 226,000 over the year

Contractors

Construction employers add 36,000 jobs in January and 226,000 over the year

Industry employment is most since August 2008 As unemployment rate falls sharply.


By Associated General Contractors of America | February 2, 2018

Construction employment increased by 36,000 jobs in January to the highest level since August 2008, according to an analysis of new government data by the Associated General Contractors of America. Association officials said a possible new measure being discussed in Washington that would invest an additional $1.5 trillion in repairing and improving infrastructure would both help the sector continue to add jobs and attract new workers.

"The construction industry has consistently added workers at nearly double the rate of the overall economy," said Ken Simonson, the association's Chief Economist. "The outlook remains positive for further growth in the industry. But finding workers to complete all projects will be a challenge with unemployment so low overall and in construction."

Construction employment totaled 7,099,000 in January, a gain of 36,000 for the month and 226,000, or 3.3%, over 12 months. The economist pointed out that the­­ year-over-year growth rate in industry jobs was more than double the 1.5% rise in total nonfarm payroll employment.

Residential construction—comprising residential building and specialty trade contractors—added 19,000 jobs in January and 88,400 jobs, or 3.3%, over the past 12 months. Nonresidential construction (building, specialty trades, and heavy and civil engineering construction) employment increased by 16,400 jobs in January and 137,200 positions, or 3.3%, over 12 months.

The number of unemployed jobseekers with recent construction experience fell to 707,000 in January, down from 859,000 in January 2017, while the unemployment rate in construction dropped to 7.3% last month from 9.4% a year earlier. The number and rate were the lowest for January since the series began in 2000. Unemployment data by industry are not seasonally adjusted, and winter figures for construction are normally higher than they are for total nonfarm employment, but these declines show how difficult it has become for the industry to find experienced workers, Simonson said.

Average hourly earnings in the industry climbed to $29.33, a rise of 2.9% from a year earlier. The economist noted that construction pays nearly 10% more per hour than the average nonfarm private-sector job in the United States.

Construction officials said that a new presidential push to boost infrastructure investments by $1.5 trillion over the next ten years would give a needed boost to infrastructure contractors who, according to construction spending figures released yesterday, have seen lagging demand compared to other market segments. Moreover, significant new and long-term investment in infrastructure would help encourage more people to consider high-paying careers in construction.

"Bringing our aging infrastructure back to a state of good repair will support short-term economic growth while making our economy more efficient and competitive over the long-term," said Stephen E. Sandherr, the association's Chief Executive Officer. "These new investments will also send a clear signal to new workers to consider careers in construction and the middle-class life those jobs support."

Related Stories

| Nov 11, 2010

Saint-Gobain to make $80 million investment in SAGE Electrochromics

Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.

| Nov 11, 2010

Saint-Gobain to make $80 million investment in SAGE Electrochromics

Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.

| Nov 11, 2010

USGBC certifies more than 1 billion square feet of commercial space

This month, the total footprint of commercial projects certified under the U.S. Green Building Council’s LEED Green Building Rating System surpassed one billion square feet. Another six billion square feet of projects are registered and currently working toward LEED certification around the world. Since 2000, more than 36,000 commercial projects and 38,000 single-family homes have participated in LEED.

| Nov 10, 2010

$700 million plan to restore the National Mall

The National Mall—known as America’s front yard—is being targeted for a massive rehab and restoration that could cost as much as $700 million (it’s estimated that the Mall has $400 million in deferred maintenance alone). A few of the proposed projects: refurbishing the Grant Memorial, replacing the Capitol Reflecting Pool with a smaller pool or fountain, reconstructing the Constitution Gardens lake and constructing a multipurpose visitor center, and replacing the Sylvan Theater near the Washington Monument with a new multipurpose facility.

| Nov 9, 2010

Just how green is that college campus?

The College Sustainability Report Card 2011 evaluated colleges and universities in the U.S. and Canada with the 300 largest endowments—plus 22 others that asked to be included in the GreenReportCard.org study—on nine categories, including climate change, energy use, green building, and investment priorities. More than half (56%) earned a B or better, but 6% got a D. Can you guess which is the greenest of these: UC San Diego, Dickinson College, University of Calgary, and Dartmouth? Hint: The Red Devil has turned green.

| Nov 9, 2010

12 incredible objects being made with 3D printers today

BD+C has reported on how 3D printers are attracting the attention of AEC firms. Now you can see how other creative types are utilizing this fascinating printing technology. Among the printed items: King Tut’s remains, designer shoes, and the world’s smallest Rubik’s Cube.

| Nov 9, 2010

U.S. Army steps up requirements for greening building

Cool roofs, solar water heating, and advanced metering are among energy-efficiency elements that will have to be used in new permanent Army buildings in the U.S. and abroad starting in FY 2013. Designs for new construction and major renovations will incorporate sustainable design and development principles contained in ASHRAE 189.1.

| Nov 9, 2010

Designing a library? Don’t focus on books

How do you design a library when print books are no longer its core business? Turn them into massive study halls. That’s what designers did at the University of Amsterdam, where they transformed the existing 27,000-sf library into a study center—without any visible books. About 2,000 students visit the facility daily and encounter workspaces instead of stacks.

| Nov 9, 2010

Turner Construction report: Green buildings still on the agenda

Green buildings continue to be on the agenda for real estate owners, developers, and corporate owner-occupants, according to the Turner 2010 Green Building Market Barometer. Key findings: Almost 90% of respondents said it was extremely or very likely they would incorporate energy-efficiency improvements in their new construction or renovation project, and 60% expected to incorporate improvements to water efficiency, indoor environmental quality, and green materials.

| Nov 5, 2010

New Millennium’s Gary Heasley on BIM, LEED, and the nonresidential market

Gary Heasley, president of New Millennium Building Systems, Fort Wayne, Ind., and EVP of its parent company, Steel Dynamics, Inc., tells BD+C’s Robert Cassidy about the Steel Joist Manufacturer’s westward expansion, its push to create BIM tools for its products, LEED, and the outlook for the nonresidential construction market.

boombox1
boombox2
native1

More In Category



Curtain Wall

7 steps to investigating curtain wall leaks

It is common for significant curtain wall leakage to involve multiple variables. Therefore, a comprehensive multi-faceted investigation is required to determine the origin of leakage, according to building enclosure consultants Richard Aeck and John A. Rudisill with Rimkus. 


halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021