flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Concrete industry reduces carbon footprint by 13% over five years

Codes and Standards

Concrete industry reduces carbon footprint by 13% over five years

Result mostly due to more efficient use of Portland cement.


By Peter Fabris, Contributing Editor | March 16, 2020

Courtesy Pixabay

National Ready Mixed Concrete Association (NRMCA) members have lowered their carbon footprint by 13% in five years, according to an association news release.

“The 13% reduction in carbon footprint is for 4,000 psi (pounds per square inch) concrete, the most frequently used concrete in the United States,” said James Bogdan, senior director, sustainability initiatives for NRMCA. “Carbon footprint reduction ranged from 8% for 2,500 psi concrete and 20% for 8,000 psi concrete.”

The reductions are mainly due to more efficient use of Portland cement, the primary binder used to make concrete. NRMCA’s performance-based specifications have helped eliminate prescriptive limits on concrete formulation such as minimum cement content and low water-to-cement ratio.

These limitations unnecessarily drive up cement content, the main contributor to carbon emissions, the release says. Some NRMCA members have lowered their carbon even more through innovation. For some applications and projects, concrete producers are incorporating technologies such as supplementary cementitious materials, low-carbon cements, and carbon capture to lower carbon footprint by 50% or more.

Related Stories

Codes and Standards | Sep 27, 2019

AIA declaration: Climate change requires ‘holistic approach’

Must address interdependencies among people, buildings, infrastructure, and the environment.

Codes and Standards | Sep 26, 2019

San Jose’s new building energy code is the most stringent among large cities

New regulations aim to make zero-emission electric buildings the norm.

Codes and Standards | Sep 26, 2019

Building support for climate action depends on linking it to health, economic benefits

USGBC report finds most people don’t think environmental problems significant enough to prioritize action.

Codes and Standards | Sep 20, 2019

OSHA has a new chief for its construction directorate

Former Army medical staffer Scott Ketcham has extensive OSHA experience.

Codes and Standards | Sep 20, 2019

American Wood Council updates free Connection Calculator

Tool includes cross-laminated timber connection provisions and post-frame ring shank nails.

Codes and Standards | Sep 19, 2019

Virtual reconnaissance of Bahamas finds some structures performed well during Dorian

Amid devastation, lives likely saved by resilient buildings.

Codes and Standards | Sep 19, 2019

Obama-era Waters of the U.S. rule revoked

New rule expected to define protected waterways more narrowly.

Codes and Standards | Sep 17, 2019

California will enact rent cap bill limiting rent increases to 5% plus inflation

Applies to apartments built at least 15 years ago.

Codes and Standards | Sep 17, 2019

Zero energy buildings can be constructed with no added upfront cost

ROI can be realized in as little as one year.

Codes and Standards | Sep 13, 2019

Researchers use U. of Arkansas buildings as testbed for CLT panels

Investigation could influence future use of the materials.

boombox1
boombox2
native1

More In Category


Reconstruction & Renovation

Movement to protect historic buildings raises sharp criticism

While the movement to preserve historic buildings has widespread support, it also has some sharp critics with well-funded opposition groups springing up in recent years. Some opponents are linked to the Stand Together Foundation, founded and bankrolled by the Koch family’s conservative philanthropic organization, according to a column in Governing magazine.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021