flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Commercial building measurement standard could meet resistance from owners

Commercial building measurement standard could meet resistance from owners

Some owners could lose property value if they adhere to standardization proposal


By BD+C Staff | May 28, 2014
Photo: Larsinio via Wikimedia Commons
Photo: Larsinio via Wikimedia Commons

A proposed new standard method to measure commercial buildings throughout the world is likely to find resistance among some building owners.

The International Property Measurement Standards Coalition plans to announce a single measurement system for the global office market in June 2014.

The effort is meant to address one of the biggest complaints of office tenants: that building owners throughout the world use different systems for measuring how many square feet or square meters tenants rent. The different methods in use today can deviate as much as 24% from one another.

For some building owners, a new measurement standard could mean that their building would shrink in size and lose value.

“There is a risk that some firms may be sitting on balance sheets that are actually worth significantly less when measured by a common standard,” Scott McMillan, chief of real estate at the International Monetary Fund, told the Wall Street Journal.

The new standard will be voluntary, so building owners are not obligated to follow it. But, tenants could pressure them by avoiding leasing with owners that fail to adopt it.

(http://www.wsj.com/articles/building-owners-brace-for-common-approach-to-measuring-office-space-1401231827?mod=residential_real_estate)

Related Stories

Codes and Standards | Dec 8, 2021

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

City aims to increase housing as projections point to sharp population increase.

Codes and Standards | Dec 7, 2021

Design problems now the primary cause of construction claims and disputes

More likely to occur due to more tight timescales imposed upon third parties engaged in design.

Codes and Standards | Dec 5, 2021

New standard for Phase I environmental reports requires more research work on many sites

Update affects around 250,000 commercial real estate transactions a year.

Codes and Standards | Nov 30, 2021

Dept. of Energy publishes RFP for technical assistance on supporting better building codes

Addresses advanced standards to reduce energy consumption and GHG emissions.

Codes and Standards | Nov 29, 2021

FAA seeking design of air traffic control towers of the future

Call for design submissions for safe, efficient structures.

Codes and Standards | Nov 28, 2021

Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions

In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.

Codes and Standards | Nov 23, 2021

New York’s Labor Law Section 240 and how it affects general contractors

The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.

Codes and Standards | Nov 22, 2021

ABC’s Construction Technology Report finds focus on solving operational problems

More than half rely on project management software.

Codes and Standards | Nov 22, 2021

Contractors say 811 utility location system has significant flaws

More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021