flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Commercial and multifamily construction starts rebounded in 2021

Codes and Standards

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.


By Peter Fabris, Contributing Editor | February 2, 2022
Bulldozer on a construction site

Courtesy Pixabay

After stalled projects and uncertainties due to COVID plagued the construction industry in 2020, commercial and multifamily construction starts bounced back in 2021, according to Dodge Construction Network.
 
Commercial and multifamily construction starts increased 16% nationwide in 2021. But starts remain below 2019 levels, indicating that the sector has not fully recovered from the impact of the pandemic.
 
In the top 20 metro areas, commercial and multifamily starts were 5% below the level recorded in 2019, and national commercial and multifamily starts were just 2% below the 2019 level. Larger metro regions have lagged other areas as demand for construction shifted away from denser urban zones.  

In the top 10 metro areas, commercial and multifamily starts were 9% below their 2019 levels, while starts in the metro areas ranked 11-20 were up 5% from 2019. This shows that in 2021, smaller, less dense metropolitan areas became increasingly popular.

Related Stories

| Feb 22, 2012

ACI BIM manual for cast-in-place concrete in development

The improved communication, coordination, and collaboration afforded by BIM implementation have already been shown to save time and money in projects.

| Feb 20, 2012

Comment period for update to USGBC's LEED Green Building Program now open

This third draft of LEED has been refined to address technical stringency and rigor, measurement and performance tools, and an enhanced user experience.

| Feb 20, 2012

GAF introduces web portal for architects and specifiers

The new portal offers a clean look with minimal clutter to make it easier to find the technical information and product data that architects need.

| Feb 17, 2012

AGC advocates for federal procurement reform

Ensure that small business goals take into consideration actual small business capacity in relevant specialty markets.

| Feb 17, 2012

Codes not to blame for Anchorage roof collapses following heavy snows

Design or construction problems likely contributed to the collapses, according to city officials.

| Feb 17, 2012

Comment period opens March 1 for LEED 2012 update

USGBC says that LEED's strength comes from its continuous evolution.

| Feb 17, 2012

OSHA training videos on proper respirator use available online

17 short videos to help workers learn about the proper use of respirators on the job.

| Feb 17, 2012

Union/employer collaboration on the rise aimed at exceeding OSHA safety standards

Unions have learned to help employers win contracts with bids made competitive through good safety practices.

| Feb 16, 2012

Gain greater agility and profitability with ArchiCAD BIM software

White paper was written with the sole purpose of providing accurate, reliable information about critical issues related to BIM and what ArchiCAD with advanced technology such as the GRAPHISOFT BIM Server provide as an answer to address these issues.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021