flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Commercial and multifamily construction starts rebounded in 2021

Codes and Standards

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.


By Peter Fabris, Contributing Editor | February 2, 2022
Bulldozer on a construction site

Courtesy Pixabay

After stalled projects and uncertainties due to COVID plagued the construction industry in 2020, commercial and multifamily construction starts bounced back in 2021, according to Dodge Construction Network.
 
Commercial and multifamily construction starts increased 16% nationwide in 2021. But starts remain below 2019 levels, indicating that the sector has not fully recovered from the impact of the pandemic.
 
In the top 20 metro areas, commercial and multifamily starts were 5% below the level recorded in 2019, and national commercial and multifamily starts were just 2% below the 2019 level. Larger metro regions have lagged other areas as demand for construction shifted away from denser urban zones.  

In the top 10 metro areas, commercial and multifamily starts were 9% below their 2019 levels, while starts in the metro areas ranked 11-20 were up 5% from 2019. This shows that in 2021, smaller, less dense metropolitan areas became increasingly popular.

Related Stories

Codes and Standards | Oct 17, 2017

Updated versions of EnergyPlus and OpenStudio building energy modeling tools released

Open-source apps include enhancements for urban-scale modeling.

Codes and Standards | Oct 16, 2017

New, comprehensive insurance exhibit released in AIA 2017 contract document updates

Will allow AIA to make updates more frequently as insurance market changes.

Codes and Standards | Oct 12, 2017

New AIA contract document designates responsibilities for sustainable projects

Roles of architects, contractors outlined in E204–2017.

Codes and Standards | Oct 11, 2017

Data, transparency are keys to next steps in green building, says USGBC chief

Monitoring and comparing performance are critical to advancing sustainability goals.

Codes and Standards | Oct 10, 2017

New guidelines for quality control on application of membrane roof systems released

NRCA document provides guidance for on-site evaluation.

Codes and Standards | Oct 9, 2017

New app calculates maximum allowable heights for building occupancy types, classes of construction

The app streamlines compliance on various types of construction.

Codes and Standards | Oct 5, 2017

California lawmakers pass bill that requires GCs to pay wages of sub employees if subs fail to pay

The measure will go into effect in January if the governor signs it.

Codes and Standards | Oct 4, 2017

Ambitious but realistic increase in clean energy would cut GHG emissions by 80% in the U.S.

NRDC report says goal can be achieved with existing tools.

Codes and Standards | Oct 3, 2017

Reducing duct leakage is focus on latest green building standards updates

ASHRAE 189.1 broadens testing requirements to include more types of ducts.

Codes and Standards | Oct 2, 2017

Nationwide retrofit strategy in Canada could cut 51% of emissions from large buildings

The roadmap provides government and industry with a targeted plan.

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021