flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Code-conforming wood design guide available

Codes and Standards

Code-conforming wood design guide available

The guide summarizes provisions for the use of wood and wood products in the 2018 IBC.


By Peter Fabris, Contributing Editor | August 29, 2019
Code-conforming wood design guide available

Photo: Tall wood building student residence currently under construction at UBC in Vancouver, B.C. Credit: Acton Ostry Architects

  

The 2018 Code Conforming Wood Design (CCWD), a joint publication of the American Wood Council (AWC) and the International Code Council, is now available.

The free download summarizes key provisions related to the use of wood and wood products as they appear in the 2018 International Building Code (IBC). The publication compiles the occupancy and height and area provisions of the IBC for wood structures into one publication.

“The complexity and scope of the IBC makes it difficult for designers to know about all of the code provisions that affect the use of wood products in construction,” said Kenneth Bland, AWC vice president of codes & regulations, in a news release. “CCWD consolidates and provides additional explanation for many of those provisions to make wood building compliance with the IBC as simple as possible.”

Among the 2018 IBC code changes mentioned in the 2018 CCWD:
· Alternatives for protecting attics in buildings using an NFPA 13R automatic sprinkler system. This has specific application to construction designed in accordance with IBC Sections 510.2 and 510.4, based on the height of the roof above the lowest level of required fire department vehicle access.
· Provisions for a fire-watch during non-working hours when construction exceeds 40 feet in height above the lowest adjacent grade, if required by the fire code official. The International Fire Code contains additional fire watch provisions.
· Updated references to AWC’s 2018 National Design Specification for Wood Construction and 2018 Wood Frame Construction Manual.

Related Stories

| Dec 26, 2013

USGBC recognizes Ohio for achieving 100th LEED-certified public school

The U.S. Green Building Council (USGBC) has recognized the state of Ohio and the Ohio School Facilities Commission (OSFC) on the LEED certification of the 100th public school building in the state. 

| Dec 26, 2013

WDMA launches project to create ISO-compliant architectural doors

WDMA's National Architectural Door Council has initiated a project to create ISO-compliant Product Category Rules for architectural wood flush and stile and rail doors

| Dec 19, 2013

Defense Department okays Green Globes standard for DoD facilities

The Green Globes certification program from the Green Building Initiative can be used for the renovation and construction of Department of Defense facilities following agency endorsement.

| Dec 19, 2013

New York City proposal may boost standards for crane maintenance

New York City may boost maintenance standards for cranes operating in the city, including the addition of load cycle counters to record data regarding every lift that a crane performs.

| Dec 19, 2013

Lawmakers say EPA’s Energy Star standards lack transparency

A bipartisan group of lawmakers is raising concerns that the Environmental Protection Agency has not been transparent in drafting energy-efficiency standards under the Energy Star program.

| Dec 18, 2013

ASHRAE publishes 2013 thermal comfort standard

Major revisions for design and measurement of comfortable spaces are included in a newly published ASHRAE 2013 thermal comfort standard.

| Dec 11, 2013

Texas to require architects to be fingerprinted to get licensed

Starting January 1, 2014, architects who apply for an occupational license in Texas will have to share their fingerprints with the state.

| Dec 11, 2013

Province of Ontario is reviewing bill to require timely payments to contractors

Legislation is under review in the Province of Ontario that would mandate timely payments to contractors.

| Dec 11, 2013

Federal design-build proposal could make it easier for small businesses to land government contracts

The Design-Build Efficiency and Jobs Act, a bill pending in the U.S. House of Representatives, would streamline the bid and proposal process by requiring government agencies to use a two-step process when seeking design-build contracts for projects worth more than $750,000.

| Dec 11, 2013

NIST recommends tougher standards for tornado resilience

Buildings in tornado-prone areas should be constructed to withstand strong winds just as hurricanes are factored into building codes in coastal areas, says a federal report examining the 2011 killer tornado in Joplin, Mo.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021