The Cheyenne, Wyoming City Council voted down a measure that would have implemented design standards for new construction and building additions downtown.
The goal was to help jumpstart the revival of the state capital’s central business district. Detractors said this move could backfire and dampen downtown development. The standards would regulate how far buildings must be set back from the street, what construction materials could be used, and how open spaces are included in the projects. There are currently no building design standards for the city’s downtown. It is the only zoned district in the city without that type of regulation.
One critic told the Wyoming News that downtown is a perfect place to allow architects and developers to experiment with different styles and building materials rather than forcing them to match the character of surrounding buildings.
A local architect and downtown property owner said guidelines can help to raise the quality of designs, but added that it would be a good idea to include a flexible appeals or exemption process for developers who want to build quality projects with "innovative and modern designs" that might not meet all the design regulations.
(http://www.wyomingnews.com/articles/2014/11/25/news/01top_11-25-14.txt#.VHXlUjTF_ng)
(http://www.wyomingnews.com/articles/2014/11/19/news/19local_11-19-14.txt#.VG30yDTF_ng)
Related Stories
Codes and Standards | Feb 22, 2015
Louisiana officials critical of stricter building standards in flood-prone areas
Buildings would have to be built either two or three feet above the base flood elevation for a 100-year flood or above the base elevation for a 500-year flood.
Codes and Standards | Feb 18, 2015
Buildings with rocking steel-braced frames are advantageous in earthquakes
Research at Case Western Reserve University has found that buildings that rock during an earthquake and return to plumb would withstand seismic shaking better than structural designs commonly used today in vulnerable zones of California and elsewhere.
Codes and Standards | Feb 18, 2015
USGBC concerned about developers using LEED registration in marketing
LEED administrators are concerned about a small group of developers or project owners who tout their projects as “LEED pre-certified” and then fail to follow through with certification.
Codes and Standards | Feb 12, 2015
ASHRAE, USGBC, IES consider biomass requirements in green building standard
The proposal would add biomass to approved renewables.
Codes and Standards | Feb 12, 2015
New Appraisal Institute form aids in analysis of green commercial building features
The Institute’s Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work.
Codes and Standards | Feb 8, 2015
ASHRAE, IAQA approve consolidation
Under the consolidation, IAQA will become a part of the ASHRAE organization while maintaining its own brand and Board of Directors.
Codes and Standards | Feb 6, 2015
Obama executive order requires federal construction projects to consider flood damage caused by climate change
To meet the new standard, builders must build two feet above the currently projected elevation for 100-year floods for most projects.
HVAC | Feb 6, 2015
ASHRAE, REHVA publish guide to chilled beam systems
The guide provides tools and advice for designing, commissioning, and operating chilled-beam systems.
Codes and Standards | Feb 2, 2015
AGC working with EPA on website to help with environmental rule compliance
The goal is for the site to be improved to make it easier for construction contractors to learn how to comply with federal and state environmental guidelines.
| Feb 2, 2015
New York law requires informing firefighters of wood truss construction
New York enacted a law that could make firefighting a bit safer by mandating property owners inform government and first-responders when they build or rehabilitate a building using "truss-type" pre-engineered wood or timber.