Canada’s Prime Minister Justin Trudeau recently issued ministerial mandate letters that outline overall expectations and policy objectives for the nation, which include building codes changes and a net-zero emissions building strategy.
Trudeau’s instructions contain a mandate to develop national model building codes “that align with national climate objectives and provide a standard for climate-resilient buildings.” Trudeau also wants a net-zero emissions building code and model retrofit code developed by the end of 2024.
Currently, Canada relies on a committee of provincial and territorial volunteers to drive building code development. Trudeau’s recent actions reflect “a recognition that accelerating building code adoption, enforcement, and compliance will require federal action to spur market readiness activities in provinces and municipalities,” according to published reports.
Trudeau has also called for a fossil fuel emission cap, a 75% methane emissions reduction this decade, and a net-zero electricity grid by 2035.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
