Tidal flooding in calm weather has moved beyond being an occasional nuisance to a common occurrence in several communities along the East and Gulf Coasts.
Among the areas coping with flooding due to sea level rise are Norfolk, Va., Fort Lauderdale, Fla., Charleston, S.C., and Tybee Island, Georgia. Flooding ranges from a few inches to several feet deep, but these events have significant impacts including halting traffic, preventing drainage runoff, submerging lawns, cars, and basements, and fouling fresh water wells with salt and other contaminants. A recent New York Times article notes that land in Norfolk, Va., is slowly sinking, worsening floods there.
Local officials have turned to state and federal governments for guidance and help. Some have asked for billions to pay for flood walls, pumps, and road improvements. To date, Congress has done little to aid vulnerable communities.
The article notes that leading scientists have repeatedly updated their projections on the amount of sea level rise stemming from global warming. In 2013, there was consensus that three feet was the highest plausible rise by the year 2100, but now some researchers say that six or seven feet may be possible.
Related Stories
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.
| Jan 25, 2013
Builders Hardware Manufacturers Assn. revises five ANSI hardware standards
The Builders Hardware Manufacturers Association (BHMA) has released five revisions to ANSI/BHMA standards recently been approved by ANSI (American National Standards Institute).
| Jan 16, 2013
Pentagon plans huge spending cuts, including construction funds, amid budget deadlock fears
Defense Secretary Leon Panetta has ordered cuts to military spending as a precaution in case the White House and Congress fail to agree to avert $52 billion in cuts to the Pentagon budget this year.
| Jan 16, 2013
GSA's Green Proving Ground program pushes energy efficiency
The General Services Administration, which manages a portfolio of almost 10,000 buildings, is using the Green Proving Ground program to test technological advances in energy efficiency.
| Jan 16, 2013
Standards that include reflective roofs must take into account local climate
Roofs painted white can reflect heat and reduce warm-weather energy use, but in cooler regions like Minneapolis or Chicago, the issue of energy-efficiency is less straightforward.
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
