flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

California Supreme Court rules that architects can be sued by condo association

California Supreme Court rules that architects can be sued by condo association

Design defects will be fair game for lawsuits by residential groups


By BD+C Staff | July 11, 2014

California’s Supreme Court has ruled unanimously that the principal architects for a condominium project may be sued directly by a condominium homeowners association for design defects. 

Skidmore, Owings & Merrill and HKS, Inc. were the principal architects for a 595 unit condominium project built near AT&T Park in San Francisco. The case, Beacon Residential Community Association v. Skidmore, Owings & Merrill, LLP, pertained to a 595-unit condominium project built near AT&T Park in San Francisco.

The units allegedly developing several defects including water infiltration, structural cracks, and overheating that made units virtually uninhabitable at times. The homeowners association sued the architects, alleging that these defects were caused by negligent design.

The decision highlighted the closeness of the connection between the architects’ conduct and the plaintiffs’ injuries, the limited and predictable class of potential plaintiffs, and the absence of options for the owners in obtaining design services on their own. 

The decision held that even though, on most projects, the developer has the final say on design choices, the architect can’t escape liability to the end user. This decision is likely to give homeowners associations another target in defect cases. Architecture firms should consult their liability insurer to determine whether these claims will be covered.

(http://www.jdsupra.com/legalnews/architects-may-be-sued-directly-by-homeo-19296/)

Related Stories

Codes and Standards | Jul 6, 2015

First valuation advisory for green and high performance property adopted

The document provides voluntary guidance to appraisers on the background and competency necessary to credibly value green buildings.

Codes and Standards | Jun 24, 2015

Maryland’s Prince George County turns to P3s to build green infrastructure

Over the next 10 years, the county must convert 15,000 acres of watertight surfaces—almost 5% of the county's total area—into surfaces that absorb or treat rainwater. 

Codes and Standards | Jun 24, 2015

Philadelphia considers more incentives for green building

Developers could be allowed additional height, floor area on projects that meet benchmarks.

Codes and Standards | Jun 24, 2015

LEED building at Duke University may be retrofitted to prevent bird deaths

More birds die from colliding with buildings at Duke than on any other campus in a 45-school survey conducted by Augustana College. Duke is located along the Atlantic Flyway, a bird migration route. 

Codes and Standards | Jun 24, 2015

Balcony collapse in Berkeley, Calif., prompts an examination of codes

Dry rot and too much weight appear to be the causes of a fatal accident at an eight-year-old building in Berkeley, Calif. 

Codes and Standards | Jun 18, 2015

Guides to wood construction in high wind areas updated

The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.

Codes and Standards | Jun 18, 2015

New document addresses school safety and security

In an effort to balance security and fire safety features within codes, standards and planning, NFPA hosted a two-day workshop, “School Safety, Codes and Security”, last December. The findings are now available in an NFPA report.

Codes and Standards | Jun 18, 2015

Two myths regarding NFPA 101 Life Safety Code debunked

NFPA life safety engineer Ron Coté settles the debate over second egress doors and exit signs.

Codes and Standards | Jun 18, 2015

How to prevent corrosion in sprinkler system piping

The technical committees responsible for NFPA 13, Installation of Sprinkler Systems, have been looking at ways to eliminate or reduce corrosion in sprinkler systems for several revision cycles.

Codes and Standards | Jun 11, 2015

Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

Includes results of new tests and addresses IECC and ASHRAE compliance paths.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021