flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

California revives study of earthquake faults

California revives study of earthquake faults

Project includes zoning maps that could restrict development


By BD+C Staff | August 8, 2014
Map: USGS
Map: USGS

California reinstituted an ambitious plan to study dangerous earthquake faults and create zoning maps that could restrict development. In July, the California Geological Survey began to zone the Santa Monica fault, which is among 2,000 miles of fault lines statewide that still need to be mapped.

California drastically reduced these mapping efforts over the past 20 years because of budget cuts. Gov. Jerry Brown recently signed off on $1.49 million in new funding and $1.3 million in annual dedicated funding to be paid for with increased building permit fees.

Without the maps, many communities have limited information on the location of faults, and whether they might impact new development. More than a dozen properties were approved for construction on or near the Hollywood and Santa Monica faults over the last decade without in-depth studies that would have been required had the state zoned those faults, according to the Los Angeles Times. Both faults could cause major temblors.

Building permit fees were increased by about 30% to fund the mapping project.

(http://www.latimes.com/local/la-me-quake-faults-20140702-story.html)

Related Stories

Codes and Standards | Oct 11, 2021

New program to promote mass timber construction launched in Boston

City’s planning and development agency to award grants for projects in early-stage planning.

Codes and Standards | Oct 6, 2021

Intl. Code Council publishes EV and building codes resource

Assists communities in setting policies for electric vehicle charging requirements.

Codes and Standards | Oct 5, 2021

Feds award $1 billion to renovate health centers

Funds will modernize existing infrastructure and cover other COVID-19-related capital needs.

Codes and Standards | Oct 4, 2021

Boston City Council approves mandate for major emissions cuts for large buildings

Applies to buildings 20,000 sf or larger—about 4% of city’s buildings.

Codes and Standards | Oct 4, 2021

HPD Collaborative and Green Seal to align standards

Will result in expanded options for manufacturers to enhance sustainability reporting and certifications.

Codes and Standards | Sep 30, 2021

U.S. has a deficit of 5 million homes

Builders unable to keep pace with demand.

Codes and Standards | Sep 29, 2021

Mass Timber group study will compare structural round timber to glulam products and steel

Will compare costs, capabilities, and carbon impacts of structural materials.

Codes and Standards | Sep 28, 2021

Massachusetts creates Commission on Clean Heat

First-of-its kind body to set targets for buildings to reduce emissions from heating fuels.

Codes and Standards | Sep 27, 2021

Commercial real estate industry faces SEC climate disclosure regulations

Risks associated with climate change would have to be revealed.

Codes and Standards | Sep 22, 2021

Group proposes Carbon Use Intensity metric for new buildings

Plan would track embedded carbon on projects.

boombox1
boombox2
native1

More In Category

Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021