The California Energy Commission (CEC) passed new standards that would mandate solar energy and storage on new commercial buildings and high-rise multifamily structures.
The new standards would affect hotel/motel, office, medical office and clinics, retail and grocery, restaurant, school, and civic (e.g., theaters, auditoriums, and convention centers) new construction. If the California Building Standards Commission also approves the standards when it votes in December, the new requirements would go into effect January 1, 2023.
New projects would also include an “energy budget” to regulate hydrocarbon use to encourage builders to incorporate heat pumps instead of gas-fueled HVAC. Critics of the new standards say they will increase project costs.
Proponents say inclusion of additional wiring at the onset can be significantly less expensive than rewiring a building for solar storage. Additional costs can be reduced through federal and state tax breaks.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.