flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

California bill would require purchase of low-carbon construction products

Codes and Standards

California bill would require purchase of low-carbon construction products

Contractors would have to source products based on greenhouse gas impact, not price, on state projects.


By Peter Fabris, Contributing Editor | November 14, 2017
Redwood National Forest

A new California bill would tackle carbon emissions in a new way—by requiring the use of lower-carbon construction products.

Assembly Bill 262, the Buy Clean Act, would require all state departments and the University of California and California State University systems to buy steel, rebar, flat glass, and mineral wool board insulation for its infrastructure projects from low-carbon producers. This would be a drastic change from the current lowest-cost purchasing strategy.

The latter allows contractors to buy materials from anywhere—including China—where materials are more likely to be produced with less energy efficient methods. The bill would require the state to determine the average greenhouse gas (GHG) emissions per unit from the manufacture of the four infrastructure products.

Bidders on state projects would be required to submit Environmental Product Declarations, (EPDs), to prove that the materials they use are at or below the average for GHG impact. The Buy Clean bill has bi-partisan support in the legislature, and is supported by a coalition of labor, business, environment, and building trade groups.

Related Stories

| Nov 20, 2014

Revamped zoning is transforming several New Jersey downtowns

The zoning policy shift could produce the biggest transformation of North New Jersey’s downtowns since the arrival of malls pulled shoppers away from town centers in the 1960s and 1970s.

| Nov 20, 2014

ANSI approves 2015 Wood-Frame Construction Manual standard

The American Wood Council's 2015 “Wood-Frame Construction Manual for One- and Two-Family Dwellings” (WFCM ) has been approved as an American National Standard by the American National Standards Institute (ANSI).

| Nov 17, 2014

AAMA releases new blast hazard mitigation specifications for vertical fenestration systems

This document provides a guide for manufacturers, architects/specifiers, contractors, and building owners for specifying types of systems and services to meet the requirements of blast hazard mitigation.

| Nov 17, 2014

National Roofing Contractors Assn. offers guide for LEED v4 provisions

National Roofing Contractors Association has released LEED v4: Roofing-related Provisions, a document that examines the roofing-related provisions of LEED v4.

| Nov 14, 2014

Army net-zero initiative moving past pilot stage

The U.S Army's ambitious net-zero initiative has had several successful pilot trials, and planners are prepared to expand the nine-part demonstration field to scores of other Army facilities.

| Nov 14, 2014

Former U.S. Treasury Secretary Paulson works to upgrade China’s building codes

Former U.S. Treasury Secretary Hank Paulson is today focused on making new construction in China more energy efficient by working with leaders to upgrade building codes.

| Nov 14, 2014

California aims for 20% reduction in water consumption by 2020

California’s comprehensive new water use plan makes conservation a priority, reinforcing a 2009 plan to reduce statewide per capita water consumption by 20% by 2020.

| Nov 6, 2014

Demountable structural steel could up the ante on sustainability

Demountable structural steel assemblies would be a greener way to make use of steel in the construction industry than recycling.

K-12 Schools | Nov 6, 2014

New Sandy Hook school features could influence security standards

The design of the new Sandy Hook Elementary School on the site of the 2012 Newtown, Conn., school shooting features enhanced security measures—some subtle and others more prominent.

| Nov 6, 2014

OSHA seeking input on electrical standards

The Occupational Safety and Health Administration (OSHA) is reviewing electrical standards for the construction industry to make sure proper safeguards are in place as electrical wiring is being installed and maintained.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â