flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

California authorizes increased use of design-build on state projects

California authorizes increased use of design-build on state projects

More agencies including General Services and Corrections can use delivery method


By BD+C Staff | October 9, 2014
Photo: Wikimedia Commons
Photo: Wikimedia Commons

California recently passed legislation representing a major step forward in authorizing state and local agencies to use design-build. Many California agencies have been using design-build for several years; other agencies required specific design-build legislation.

Some agencies were precluded by law from using a best value selection process for design-build or were not empowered to bundle design and construction into a single contract.

The new statute consolidates and amends existing laws allowing state and local agencies to use design-build, resolving problems and inconsistencies with prior legislation.

Under the updated law, the Department of General Services and the Department of Corrections and Rehabilitation may use design-build on projects in excess of $1 million. Cities and counties may also now use design-build on million-dollar-plus projects.

If the legislature wishes to expand the list of agencies authorized to use design-build in the future, the process would involve a simple amendment.

(http://www.infrainsightblog.com/2014/09/articles/legislation/major-step-forward-for-california-designbuild-sb-785-signed-september-30-2014/)

Related Stories

Codes and Standards | Dec 28, 2020

2021 Defense Authorization Act includes mass timber provision

Directs defense, agriculture secretaries to review potential for wood frame construction on defense building projects.

Codes and Standards | Dec 28, 2020

New York City proposal would require rainwater detention tanks for new development

Rule would apply to projects on lots sized 20,000 sf or larger.

Codes and Standards | Dec 17, 2020

Energy efficiency as a service gaining ground as financing approach for adopting innovations

Building owners can invest in new technology with no upfront cost.

Codes and Standards | Dec 16, 2020

Resources available to address Legionella threat

Buildings reopened after extended pandemic closure are at risk.

Codes and Standards | Dec 16, 2020

New Specifications for Concrete Construction reference manual released

Scope expanded to include shotcrete, internal curing, mineral fillers, and recycled concrete aggregates.

Codes and Standards | Dec 15, 2020

Despite COVID-19 population flight, don’t write off big cities yet

Lure of urban life and jobs may draw people back after pandemic subsides.

Codes and Standards | Dec 10, 2020

Test method for vertical fenestration installation procedures updated

FGIA issues first update for document created in 2005.

Codes and Standards | Dec 9, 2020

Newly formed Rainscreen Association aims to be recognized authority on rainscreen assemblies

Will address innovations in material performance and building designs.

Codes and Standards | Dec 9, 2020

Investors want building resiliency plans and risk mitigation practices

Owners should assess risk, insurance coverage, and ability to withstand disasters.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021