flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Calif. legislator proposes statewide solar mandate for new buildings

Codes and Standards

Calif. legislator proposes statewide solar mandate for new buildings

It would be the first such requirement in the U.S.


By Peter Fabris, Contributing Editor | January 27, 2017

Pixabay Public Domain

A California state senator has introduced a bill that would require the installation of solar power on new commercial and residential buildings statewide.

If the proposal were to become law, it would be the first such requirement in U.S. history, according to a press release by Scott Wiener, the legislator behind the bill. The statewide mandate would be similar to a city law that Wiener wrote and helped pass in 2016 as a member of the San Francisco Board of Supervisors. 

The board approved the city ordinance last year that required new small and midsized buildings in San Francisco to include solar. Some other California cities have enacted similar solar mandates.

According to current California state law, all new residential and commercial buildings up to 10 stories tall must have 15% of their roof area solar ready—defined as unshaded and free of obtrusions. The proposed new legislation would require that solar be installed on the 15% of solar-ready roof area. The solar mandate could be fulfilled by either photovoltaic or solar water systems.

Related Stories

| Feb 9, 2012

Computer tool helps engineers design roof cladding using Canada's building code

Easier to design roof cladding that can withstand winds in a given area. 

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

This case study will focus on strategies used to save the client money, achieve certification, and effectively market success once the project was complete.

| Feb 9, 2012

Rapid growth of zero energy buildings expected

Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.

| Feb 9, 2012

Stiffer OSHA fines put strain on Kansas contractors

A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.

| Feb 8, 2012

California likely to eliminate redevelopment agencies

Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.

| Feb 8, 2012

Project aimed at economical seismic retrofits on historic Memphis structures

The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.

| Feb 8, 2012

Houston signs on to Better Buildings Challenge

The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.

| Feb 8, 2012

OSHA offers free health and safety consulting for small businesses

The consultants offer confidential, non-punitive advice.

| Feb 8, 2012

Controversy over pay for prisoners on roofing job in Michigan

The disagreement was over whether the prisoners should have been paid prevailing wage for their brief time on the job because the project was paid for with a U.S. Department of Energy grant.

boombox1
boombox2
native1

More In Category




Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021