In order to ensure that specified building products comply with codes and standards, building code officials should take into account the credentials of accrediting bodies, says Shahin Moinian, P.E., the president of ICC Evaluation Service.
First, code officials should make sure that the evaluation service provider is accredited with a scope of accreditation pertaining to the products they have evaluated. In addition, the evaluation service provider should be verified to be accredited and in good standing.
One important indicator is for the provider to be accredited to ISO/IEC 17065, the international standard for certification bodies. Code officials should also review the evaluation reports published by evaluation service providers to ensure that the report is published to a standard or criteria (not a collection of unspecified documents and opinions).
The report should also relate to the product and use of such products for the installation in question. “Code officials should look for the ICC-ES marking on building and plumbing products for peace of mind when approving products,” Moinian says.
Related Stories
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
Codes and Standards | Apr 25, 2018
Lessons learned from decades of Superfund cleanups guide contaminated land reuse
Sites repurposed for residential, commercial use, and solar energy generation.
Codes and Standards | Apr 24, 2018
Vibrant downtown core the key for urban multifamily development
Nighttime activity makes the difference.
Codes and Standards | Apr 19, 2018
ILFI launches new Zero Carbon Certification
Offers greater flexibility around project fuel types and offsetting renewables.